This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X10U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X10U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X10U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X10U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U
The AirTAC MAL32X10U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 10mm stroke. It delivers 402N push and 346N pull at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X10U, a drop-in upgrade retaining the exact bore, stroke, output force, G1/8 port, and U flat-end back cover.
This legacy MAL features threaded front and back covers, whereas the current MBL uses a riveted rolling-packed body. Because this specific SKU lacks an S suffix for a magnet, it cannot support a position sensor. The rod is 12mm carbon steel with 20um hard chrome plating, guided by a self-lubricating bearing. A fixed rubber bumper absorbs end-of-stroke impact, though an adjustable air cushion is only available on the current MBLC line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X10U |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X10U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X10U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U Is Used
PCB Edge Guide Ejection
Provides a rigid 402N push at 0.5 MPa over a short 10mm travel to eject populated circuit boards from an edge-guide conveyor without damaging traces.
IC Test Handler Clamping
Holds an IC test socket firmly in place during automated pick-and-place testing, utilizing the 12mm hard-chrome rod for stable, precise alignment.
Carton Flap Tucking
Delivers a rapid 346N pull force to tuck minor flaps on small pharmaceutical cartons before sealing, fitting easily into compact packaging machinery.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U with MBL32X10U
To replace the MAL32X10U, order the MBL32X10U. Verify your 32mm bore, 10mm stroke, PT port thread, and the U flat-end rigid back cover. Since this SKU has no -S magnet, it cannot accept a CS1-M or DS1-M sensor; if you need position detection, step up to an MBL32X10US and use the current CMSG/DMSG/EMSG switches. If sizing down, the 25mm bore offers 245N push at 0.5 MPa; if you need more force, the 40mm bore provides 628N push. Note that a plain cylinder drifts when air is lost, so use an external rod lock for position holding. The fixed rubber bumper is not adjustable; choose an MBLC if your application requires adjustable air cushioning.
Upgrade checklist
- ✓ Order the MBL32X10U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X10U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U FAQ
Yes, the MAL32X10U is discontinued. The exact drop-in replacement is the MBL32X10U, which matches the 32mm bore, 10mm stroke, 402N push force, G1/8 port, and U flat-end back cover.
At 0.5 MPa it provides 402N push and 346N pull; at 0.7 MPa push is 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot accept a position sensor; the MBL32X10US replacement uses CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X10U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10U → MBL32X10U)
Tell us the quantity and destination — we quote the drop-in MBL32X10U replacement with price, stock and lead time, usually within 7-8 hours.