This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X115U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X115U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X115U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke115 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X115U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U
The AirTAC MAL32X115U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 115mm stroke. It delivers 402N push and 346N pull at 0.5MPa via a G1/8 port. The exact drop-in replacement is the MBL32X115U, matching the force, stroke, and flat U rear cover.
This legacy U-cover unit features a rigid flat-end rear for straight, non-pivot mounting. It lacks a magnet, so it cannot accept position sensors. The original MAL uses threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equal durability.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X115U |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X115U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X115U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×115 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U Is Used
PCB Router Gating
Actuates a diverter gate on a PCB depaneling conveyor, using the 402N push force at 0.5 MPa to reliably shift board flow between inspection lanes.
Carton Flap Folder
Drives a compact folding arm on a packaging line, utilizing the 115mm stroke to tuck minor flaps before tape sealing in tight machine clearances.
Vial Tray Stopper
Deploys a hard stop for incoming vial trays on a filling line, where the rigid U flat-end back cover provides stable, non-arcing mounting.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U with MBL32X115U
To replace the MAL32X115U, order the MBL32X115U. Confirm the 115mm stroke, G1/8 port, and default PT tapered threads. Because this SKU has no S suffix, it cannot support a sensor; if detection is needed, order an MBL32X115US and note the switch family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG. The fixed rubber bumper is not a lock; use an external rod lock for held loads. If a cushion is required, step up to the MBLC series.
For sizing, step down to the 25mm bore (245N push @0.5MPa) for lighter loads, or up to the 40mm bore (628N push @0.5MPa) for heavier force. With a 115mm stroke, side-load tolerance is limited by the 12mm rod; ensure external guides or a true linear rail supports the load.
Upgrade checklist
- ✓ Order the MBL32X115U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X115U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U FAQ
Yes, the MAL32X115U is discontinued. The exact drop-in replacement is the MBL32X115U, offering the same 32mm bore, 115mm stroke, G1/8 port, and flat U back cover.
At 0.5 MPa it provides 402N push and 346N pull. At 0.7 MPa push is 563N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X115U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X115U → MBL32X115U)
Tell us the quantity and destination — we quote the drop-in MBL32X115U replacement with price, stock and lead time, usually within 7-8 hours.