This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X120SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X120SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 120mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X120SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke120 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X120SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA
The AirTAC MAL32X120SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 120mm stroke. It delivers 402N push and 346N pull at 0.5MPa, utilizing a 12mm carbon-steel rod with 20um hard chrome plating. The exact drop-in replacement is the MBL32X120SCA, matching the original bore, stroke, force, G1/8 port, and CA pivot mounting. You can order the MBL32X120SCA to keep your machine running without redesigning the mounting.
This legacy unit features a CA pivot back cover designed to swing on a pin for arcing loads, while the self-lubricating front-cover bearing guide supports the rod. The original MAL body used threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Because this SKU includes the -S magnet, it originally paired with CS1-M or DS1-M switches; upgrading to the MBL32X120SCA means you must switch to the modern CMSG, DMSG, or EMSG sensor family.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X120SCA |
| Bore size | Ø32 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X120SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X120SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×120 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA Is Used
Packaging Diverter Arm
Swings a sorting gate on a packaging conveyor using the 402N push force, with the CA pivot absorbing the arcing motion of the moving rod.
Textile Yarn Guide
Traverses a yarn guide mechanism across a loom at 30-800 mm/s, relying on the self-lubricating bearing to handle continuous rapid cycling.
Carton Flap Folder
Folds minor flaps on a case erector where the 346N pull force securely retracts the mechanism in a tight machinery footprint.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA with MBL32X120SCA
To replace the MAL32X120SCA, order the MBL32X120SCA, confirming the 32mm bore, 120mm stroke, PT port thread, CA pivot back cover, and the -S magnet are retained. If your application requires an adjustable air cushion instead of the fixed rubber bumper found on this legacy model, step up to the MBLC32 equivalent on the current line. Keep in mind a plain cylinder does not hold its position when air is lost; the bumper only softens end-of-stroke impacts, so add an external rod lock for vertical loads.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. Since the 120mm stroke exceeds 300mm, the 12mm rod has limited side-load tolerance; use the CA pivot to absorb angular motion or add an external guide rail to prevent rod bending.
Upgrade checklist
- ✓ Order the MBL32X120SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X120SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA FAQ
Yes, the MAL32X120SCA is discontinued. The exact drop-in replacement is the MBL32X120SCA, which matches the 32mm bore, 120mm stroke, G1/8 port, CA pivot, and S magnet. Note that the -S magnet on the MBL requires CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
At 0.5MPa it provides 402N push and 346N pull, and 563N push at 0.7MPa, with a theoretical maximum of 82kgf at 1.0MPa. It uses a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion; if you need adjustable cushioning, use the MBLC32.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X120SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X120SCA → MBL32X120SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X120SCA replacement with price, stock and lead time, usually within 7-8 hours.