This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X125-S-CA-LB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X125-S-CA-LB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X125-S-CA-LB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke125 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X125-S-CA-LB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB
The AirTAC MAL32X125-S-CA-LB is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 125mm stroke. It delivers 402N push and 346N pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X125-S-CA-LB, which matches the bore, stroke, force, G1/8 port, LB foot mount, and CA pivot back cover.
This legacy SKU includes a built-in magnet (-S) for position sensing. The MAL works with older CS1-M or DS1-M switches, while the MBL replacement requires current CMSG, DMSG, or EMSG sensors. The original MAL body uses threaded front and back covers, whereas the MBL upgrade features a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, though a plain cylinder does not hold loads when air is lost.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X125-S-CA-LB |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X125-S-CA-LB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X125-S-CA-LB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×125 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB Is Used
Pallet Transfer Diverter
Uses the 402N push force at 0.5 MPa to deflect packaging pallets onto a secondary conveyor line, relying on the LB foot mount to stabilize the 125mm extension.
CNC Lathe Door Operator
Actuates a sliding safety door using the 125mm stroke, where the CA pivot bracket accommodates the slight arcing motion of the mechanical linkage.
Carton Flap Folder
Drives a folding arm to seal corrugated cartons, depending on the -S magnet and CS1-M sensor to verify the retracted position before glue application.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB with MBL32X125-S-CA-LB
To replace this MAL, order the MBL32X125-S-CA-LB. Confirm your 32mm bore, 125mm stroke, PT tapered port thread, LB foot mounting, and CA pivot back cover. Because this unit has an -S magnet, note that your older CS1-M or DS1-M switches will not fit the MBL; you must upgrade to CMSG, DMSG, or EMSG sensors. If you need adjustable air cushioning instead of the fixed rubber bumper, step up to the MBLC series.
For sizing, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push. The 125mm stroke on the Ø12mm rod requires a side-load guide. The CA pivot bracket swings on a pin to absorb arcing loads, and an external rod lock is required if you need to hold position during air loss.
Upgrade checklist
- ✓ Order the MBL32X125-S-CA-LB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X125-S-CA-LB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB FAQ
Yes, the MAL32X125-S-CA-LB is discontinued. The exact drop-in replacement is the MBL32X125-S-CA-LB, offering the same 32mm bore, 125mm stroke, G1/8 port, LB foot mount, and CA pivot back cover. The MBL uses a riveted rolling-packed body instead of threaded covers, and its -S magnet requires CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
At 0.5 MPa it provides 402N push and 346N pull force. At 0.7 MPa the push force is 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. It uses a fixed rubber bumper for end-of-stroke impact absorption and does not feature adjustable cushioning. The cylinder does not hold its load when air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X125-S-CA-LB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CA-LB → MBL32X125-S-CA-LB)
Tell us the quantity and destination — we quote the drop-in MBL32X125-S-CA-LB replacement with price, stock and lead time, usually within 7-8 hours.