This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X125-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X125-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X125-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke125 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X125-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM
The AirTAC MAL32X125-S-CM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 125mm stroke. It delivers 402N push and 346N pull at 0.5MPa using a G1/8 port and an M10x1.25 rod thread. The exact drop-in replacement is the MBL32X125-S-CM, matching the bore, stroke, force, port, and CM round-end mounting exactly. You simply order the MBL equivalent to keep your machine running.
This legacy SKU includes a built-in magnet (-S) for position sensing and a CM round-end back cover. The older MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Additionally, the -S magnet on this MAL works with legacy CS1-M or DS1-M switches, but upgrading to the MBL means transitioning to the current CMSG, DMSG, or EMSG sensor family. The cylinder relies on a fixed rubber bumper, not an adjustable cushion, and uses a heterogeneous two-way seal that retains grease.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X125-S-CM |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X125-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X125-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×125 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM Is Used
Textile Loom Tensioning
Uses the 402N push at 0.5MPa to maintain consistent yarn tension on a textile loom, fitting into tight weaving machine frames.
Carton Flap Folding
The 125mm stroke and CM round-end pivot push cardboard flaps into position on a packaging line before tape application.
Lab Sample Ejection
Provides reliable 346N pull force to retract a sample tray in automated medical testing equipment, using the -S magnet for cycle counting.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM with MBL32X125-S-CM
To replace the MAL32X125-S-CM, order the MBL32X125-S-CM. Confirm your G1/8 port, PT thread form, and the CM round-end back cover, which is ideal for articulating rod-end linkages. Because this SKU has the -S magnet, note that your legacy CS1-M or DS1-M switches will need upgrading to CMSG, DMSG, or EMSG sensors on the MBL body. If you need an adjustable air cushion instead of the fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to bore 25 yields 245N push at 0.5MPa, while stepping up to bore 40 provides 628N push. At 125mm stroke, side-load tolerance is limited by the 12mm rod; use an external guide or pivot to prevent rod bending. A plain cylinder does not hold a load when air is lost, so add an external rod lock for vertical applications.
Upgrade checklist
- ✓ Order the MBL32X125-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X125-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM FAQ
Yes, the MAL32X125-S-CM is discontinued. The exact drop-in replacement is the MBL32X125-S-CM, which matches the 32mm bore, 125mm stroke, G1/8 port, and CM round-end mounting. The MBL uses a riveted body instead of threaded covers, and the -S magnet now requires CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
The MAL32X125-S-CM operates at 0.1-1.0MPa with a speed range of 30-800mm/s. At 0.5MPa it delivers 402N push and 346N pull, increasing to 563N push at 0.7MPa. The maximum theoretical force is 82kgf at 1.0MPa. It uses a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X125-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-CM → MBL32X125-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X125-S-CM replacement with price, stock and lead time, usually within 7-8 hours.