This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X125-S-U-FA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X125-S-U-FA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X125-S-U-FA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke125 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X125-S-U-FA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA
The AirTAC MAL32X125-S-U-FA is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X125-S-U-FA, a drop-in alternative retaining the exact 32 mm bore, 125 mm stroke, G1/8 port, and FA flange mounting.
This SKU includes a U flat-end back cover for rigid rear mounting and an FA front flange for secure face mounting. The -S magnet enables position detection; however, the older MAL body pairs with legacy CS1-M / DS1-M switches, whereas the MBL replacement requires current CMSG / DMSG / EMSG sensors. The original MAL features threaded front and back covers, while the newer MBL utilizes a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, though it does not function as a position lock.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X125-S-U-FA |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X125-S-U-FA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X125-S-U-FA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×125 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA Is Used
PCB Router Gate
Actuates a routing machine safety gate. The 402 N push force at 0.5 MPa easily handles the door mass, while the FA flange secures the body to the machine frame.
Connector Insertion
Pushes electronic connectors into sockets on an assembly line. The 125 mm stroke provides the necessary travel, and the -S magnet verifies full extension.
Carton Flap Folder
Folds minor flaps on small packaging boxes. The U flat-end cover butts against the conveyor bracket, absorbing the 346 N pull force during retraction.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA with MBL32X125-S-U-FA
To replace this MAL, order the MBL32X125-S-U-FA. Confirm the 125 mm stroke, G1/8 port, PT thread form, U flat-end cover, and FA flange are correct for your fixture. Because this SKU has the -S magnet, you must upgrade your sensors: the MAL used CS1-M / DS1-M switches, but the MBL uses CMSG / DMSG / EMSG switches. If your application requires adjustable air cushioning instead of the standard fixed rubber bumper, step up to the current-line MBLC equivalent.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. At 125 mm stroke, the 12 mm rod has moderate side-load tolerance; ensure the FA flange and U cover are perfectly aligned to prevent binding. A plain cylinder drifts when air is lost, so add an external rod lock if the load must be held.
Upgrade checklist
- ✓ Order the MBL32X125-S-U-FA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X125-S-U-FA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA FAQ
Yes, the MAL series is discontinued. The exact drop-in replacement is the MBL32X125-S-U-FA. It matches the 32 mm bore, 125 mm stroke, G1/8 port, FA flange, and U flat-end cover. Note that the -S magnet on the MBL uses CMSG / DMSG / EMSG switches instead of the older CS1-M / DS1-M sensors.
At 0.5 MPa operating pressure, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X125-S-U-FA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X125-S-U-FA → MBL32X125-S-U-FA)
Tell us the quantity and destination — we quote the drop-in MBL32X125-S-U-FA replacement with price, stock and lead time, usually within 7-8 hours.