This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X126SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X126SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 126mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X126SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke126 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X126SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA
The AirTAC MAL32X126SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 126mm stroke. It delivers 402N push and 346N pull at 0.5MPa, utilizing a G1/8 port and an M10x1.25 rod thread. The exact drop-in replacement is the MBL32X126SCA, matching the bore, stroke, force, port, and CA pivot mounting exactly. This 126mm stroke is a non-standard made-to-order length.
This unit includes a built-in magnet (-S) for position detection with legacy CS1-M or DS1-M switches, whereas the MBL replacement upgrades to CMSG, DMSG, or EMSG sensors. The original MAL features threaded front and back covers, while the modern MBL uses a riveted rolling-packed body. The CA back cover acts as a pivot clevis, swinging on a pin to absorb arcing loads, which is critical given the 12mm carbon-steel rod's vulnerability to side-load bending. A fixed rubber bumper absorbs end-of-stroke impact, but it does not lock the rod when air is lost.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X126SCA |
| Bore size | Ø32 mm |
| Stroke | 126 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X126SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X126SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×126 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA Is Used
Packaging Conveyor Diverter
Uses the 402N push force at 0.5MPa to deflect cartons on a packaging line, while the CA pivot clevis absorbs the arcing motion as the rod extends and retracts.
Textile Yarn Guide
Shifts a yarn guide arm precisely 126mm; the CS1-M sensor confirms position, and the self-lubricating front-cover bearing ensures smooth operation in a lint-heavy environment.
Warehouse Sortation Arm
Pushes totes at 563N (0.7MPa) using the 12mm rod, relying on the fixed rubber bumper to soften the end of stroke without requiring an adjustable cushion.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA with MBL32X126SCA
To replace the MAL32X126SCA, order the MBL32X126SCA. Confirm the G1/8 port, PT thread, 126mm stroke, and the CA pivot back cover. Because this SKU has the -S magnet, plan to upgrade your sensors from the old CS1-M/DS1-M family to the current CMSG/DMSG/EMSG switches. If you need an adjustable air cushion instead of the fixed rubber bumper, step up to the MBLC series. The cylinder does not hold its load without air; add an external rod lock or pilot-operated check valve if drift is unacceptable.
For sizing, if you need less force, step down to the 25mm bore (245N push @0.5MPa). If you need more force, step up to the 40mm bore (628N push @0.5MPa, which also upgrades the port to G1/4). Because the 126mm stroke exceeds 300mm? No, but any long stroke amplifies side-load on the 12mm rod. Even at 126mm, use the CA pivot to absorb misalignment, or add an external guide rail for heavy loads.
Upgrade checklist
- ✓ Order the MBL32X126SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X126SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA FAQ
Yes, the MAL32X126SCA is discontinued. The exact drop-in replacement is the MBL32X126SCA, which matches the 32mm bore, 126mm stroke, CA pivot mounting, and G1/8 port. You must upgrade your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
At 0.5MPa, it pushes 402N and pulls 346N. At 0.7MPa, push is 563N. The maximum theoretical force is 82kgf at 1.0MPa. Note that the 126mm stroke is a non-standard made-to-order length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X126SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X126SCA → MBL32X126SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X126SCA replacement with price, stock and lead time, usually within 7-8 hours.