This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X130SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X130SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X130SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X130SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA
The AirTAC MAL32X130SCA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 130 mm stroke. It delivers a 402 N push force at 0.5 MPa, utilizing a G1/8 port and a 12 mm hard-chrome plated carbon-steel rod. The exact drop-in replacement is the MBL32X130SCA, which matches the original bore, stroke, output force, port size, and CA pivot mounting.
This legacy SKU includes a built-in magnet (-S) for position detection and a CA pivot clevis back cover designed to absorb arcing loads. The older MAL body relies on threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Additionally, the -S magnet on this MAL works with legacy CS1-M or DS1-M switches, while the MBL successor requires the current CMSG, DMSG, or EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X130SCA |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X130SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X130SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×130 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA Is Used
PCB Depaneling Router
Provides 402 N of thrust at 0.5 MPa to drive the cutting blade of a depaneling router, with the CA pivot absorbing slight arcing motions during board separation.
Pouch Packaging Flap Folder
Extends 130 mm to tuck sealing flaps on high-speed pouch packaging lines, using the self-lubricating bearing guide to maintain smooth operation in tight spaces.
Carton Label Applicator
Pushes a label applicator head against moving cartons, relying on the two-way grease-retaining seal to prevent leakage during rapid 30-800 mm/s cycling.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA with MBL32X130SCA
To replace the MAL32X130SCA, order the MBL32X130SCA. Confirm the 130 mm stroke, G1/8 port, PT thread form, and the CA pivot back cover are retained. Because this SKU has the -S magnet, note that your legacy CS1-M / DS1-M switches must be upgraded to CMSG / DMSG / EMSG sensors for the new body. The MAL relies on a fixed rubber bumper; if your application now requires adjustable end-of-stroke damping, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. At 130 mm stroke, side-load tolerance is moderate given the 12 mm rod diameter; ensure the CA clevis swings freely on its pin to prevent rod bending. A plain bumper does not hold position if air pressure drops, so add an external rod lock for suspended loads.
Upgrade checklist
- ✓ Order the MBL32X130SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X130SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA FAQ
Yes, the MAL32X130SCA is discontinued. The exact drop-in replacement is the MBL32X130SCA, which offers the same 32 mm bore, 130 mm stroke, CA pivot mounting, and G1/8 port. You must upgrade your CS1-M / DS1-M sensors to CMSG / DMSG / EMSG switches because the MBL body is riveted rather than threaded.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X130SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCA → MBL32X130SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X130SCA replacement with price, stock and lead time, usually within 7-8 hours.