This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X130SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X130SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X130SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X130SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM
The AirTAC MAL32X130SCM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 130mm stroke. It delivers 402N push and 346N pull at 0.5MPa. The direct drop-in replacement is the MBL32X130SCM, matching the same bore, stroke, force, G1/8 port, and CM round-end back cover.
This legacy unit features a built-in magnet (-S) for position sensing and a CM round-end back cover for pivot mounting. The original MAL body uses threaded front and back covers, whereas the modern MBL upgrade uses a riveted rolling-packed body. Additionally, the -S magnet on this MAL works with older CS1-M or DS1-M switches, while the MBL replacement requires current CMSG, DMSG, or EMSG sensors.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X130SCM |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X130SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X130SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×130 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM Is Used
Packaging Lane Diverter
Uses the 402N push force at 0.5MPa to pivot cardboard cartons on a 130mm stroke via the CM round-end pivot mount.
PCB Test Socket Clamp
Holds delicate printed circuit boards during automated optical inspection, relying on the 346N pull force and 30-800mm/s speed range.
Bin Dish Elevator Gate
Actuates a small hopper flap for component dispensing, where the 32mm bore fits tight machine frames and the -S magnet confirms gate closure.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM with MBL32X130SCM
To replace the MAL32X130SCM, order the MBL32X130SCM. Confirm the 32mm bore, 130mm stroke, M10x1.25 rod thread, PT port, and CM round-end back cover are correct. Because this SKU includes the -S magnet, remember to upgrade your sensors: the older CS1-M/DS1-M switches will not fit the MBL, so order CMSG, DMSG, or EMSG switches instead.
If you need to adjust the bore size, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. The MAL uses a fixed rubber bumper, not an adjustable cushion; if end-of-stroke damping is critical, look at the MBLC variant. At 130mm stroke, the 12mm rod is susceptible to side-load wear, so use the CM pivot to accommodate arcing loads. A plain cylinder drifts when air is lost, so add an external rod lock for position holding.
Upgrade checklist
- ✓ Order the MBL32X130SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X130SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM FAQ
Yes, the MAL32X130SCM is discontinued. The exact drop-in replacement is the MBL32X130SCM, offering the same 32mm bore, 130mm stroke, force, G1/8 port, and CM round-end mounting.
At 0.5MPa it pushes 402N and pulls 346N; at 0.7MPa it pushes 563N, with a maximum theoretical force of 82kgf at 1.0MPa. The -S magnet works with legacy CS1-M/DS1-M switches; the MBL replacement requires CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X130SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130SCM → MBL32X130SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X130SCM replacement with price, stock and lead time, usually within 7-8 hours.