This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X145CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X145CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X145CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke145 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X145CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA
The AirTAC MAL32X145CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 145mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa, making it a robust choice for mid-range actuation. The exact drop-in replacement is the MBL32X145CA, which matches the bore, stroke, output force, G1/8 port, and CA mounting exactly.
This legacy unit features a CA pivot back cover designed to swing on a pin for arcing loads, while its carbon-steel rod uses a 20-micron hard chrome plating to resist wear. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor. The original MAL body used threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for enhanced structural integrity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X145CA |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X145CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X145CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×145 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA Is Used
Packaging Conveyor Diverter
Pushes lightweight cardboard cartons at 402N push force, using the 145mm stroke to clear a 120mm wide conveyor belt lane.
PCB Router Tool Changer
Actuates a secondary tool holder with its 346N pull force, relying on the self-lubricating bearing guide for smooth mid-stroke positioning.
Palletizing Stop Gate
Uses the CA pivot bracket to absorb angular stress while halting empty pallets entering a lift station at 0.5MPa.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA with MBL32X145CA
To replace the MAL32X145CA, order the drop-in MBL32X145CA. Confirm your 32mm bore, 145mm stroke, G1/8 port, PT thread, and CA pivot back cover. Since this SKU has no -S magnet, it cannot support a CS1-M or DS1-M sensor; if you need position detection, upgrade to an MBL32X145CAS, which transitions you to the current CMSG, DMSG, or EMSG switch family. The fixed rubber bumper softens end-of-stroke impacts, but for adjustable air cushioning, you must step up to the MBLC series. If you need to adjust your force output, stepping down to a 25mm bore yields 245N push at 0.5MPa, while stepping up to a 40mm bore provides 628N push. A plain cylinder does not hold a load when air is lost, so add an external rod lock for vertical safety. At 145mm stroke, side-load is minimal, but always ensure the CA clevis pin is greased to prevent binding.
Upgrade checklist
- ✓ Order the MBL32X145CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X145CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA FAQ
Yes, the MAL32X145CA is discontinued. The exact drop-in replacement is the MBL32X145CA, offering identical 32mm bore, 145mm stroke, G1/8 port, and CA pivot mounting. The newer MBL uses a riveted rolling-packed body instead of the older threaded covers.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force increases to 563N. The maximum theoretical force is 82kgf at 1.0MPa. This SKU lacks a magnet, so it cannot use CS1-M or DS1-M sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X145CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145CA → MBL32X145CA)
Tell us the quantity and destination — we quote the drop-in MBL32X145CA replacement with price, stock and lead time, usually within 7-8 hours.