This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X145SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X145SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X145SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke145 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X145SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA
The AirTAC MAL32X145SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 145mm stroke. It delivers 402N push and 346N pull force at 0.5 MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. The exact drop-in replacement is the MBL32X145SCA, matching the original force, stroke, and CA pivot mount exactly.
This legacy unit features a CA pivot clevis back cover designed to swing on a pin for arcing loads, distinguishing it from rigid flat-end models. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body. Additionally, the -S magnet on this MAL works with the older CS1-M and DS1-M switches, while the MBL replacement requires the current CMSG, DMSG, or EMSG sensor family.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X145SCA |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X145SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X145SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×145 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA Is Used
Textile Loom Yarn Guide
Actuates a traversing yarn guide on a weaving loom, using the 402N push force at 0.5 MPa to shift the thread carriage while the CA pivot absorbs the lateral arc.
Packaging Flap Folder
Folds cardboard flaps on a carton sealing machine, where the 145mm stroke provides the reach needed to clear the box and the fixed bumper softens the close.
Bottling Line Diverter
Pushes a guide rail to divert glass bottles on a filling line, utilizing the CA clevis to swing smoothly as the lane width changes.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA with MBL32X145SCA
To replace the MAL32X145SCA, order the MBL32X145SCA. Confirm your 32mm bore, 145mm stroke, G1/8 port, and PT thread form. You must also account for the CA pivot back cover, which swings on a pin to accommodate arcing side-loads. Because this SKU includes the -S magnet, remember that the older CS1-M and DS1-M switches are incompatible with the MBL; you must upgrade to CMSG, DMSG, or EMSG sensors. The MAL uses a fixed rubber bumper, so if your application requires an adjustable air cushion, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push at 0.5 MPa. Because the 145mm stroke creates a long lever arm on the 12mm rod, side-load tolerance is low; rely on the CA clevis to absorb angular stress or use an external guide. A plain cylinder does not hold its load when air is lost, so fit an external rod lock or pilot-operated check valve if position holding is critical.
Upgrade checklist
- ✓ Order the MBL32X145SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X145SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA FAQ
Yes, the MAL32X145SCA is discontinued. The exact drop-in replacement is the MBL32X145SCA, which matches the 32mm bore, 145mm stroke, CA pivot mount, and G1/8 port. You must upgrade your sensors from the old CS1-M or DS1-M to the CMSG, DMSG, or EMSG family for the MBL.
The 32mm bore generates 402N push and 346N pull at 0.5 MPa. At 0.7 MPa, the push force is 563N. The maximum theoretical force is 82 kgf at 1.0 MPa. It uses a fixed rubber bumper, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X145SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X145SCA → MBL32X145SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X145SCA replacement with price, stock and lead time, usually within 7-8 hours.