This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X150CA-H — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X150CA-H in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X150CA-H, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X150CA-H
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H
The AirTAC MAL32X150CA-H is a discontinued double-acting aluminum mini round cylinder. It features a 32mm bore and 150mm stroke, delivering 402N push and 346N pull at 0.5MPa, with a maximum theoretical force of 82kgf at 1.0MPa. The exact drop-in replacement is the MBL32X150CA-H, which matches the bore, stroke, force, G1/8 port, and CA pivot mounting. The legacy MAL uses threaded front and back covers, whereas the modern MBL body uses a riveted rolling-packed construction for equally robust performance. Additionally, this specific SKU lacks an -S magnet, meaning it cannot support position sensing without mechanical modifications. The original cylinder relies on a fixed rubber bumper to soften end-of-stroke impacts, whereas the current-line MBLC offers an adjustable air cushion for heavier loads. A heterogeneous two-way seal retains grease within the self-lubricating front-cover bearing guide, ensuring smooth operation over its 150mm travel. The carbon-steel rod features 20um hard-chrome plating to resist corrosion and premature wear in demanding environments.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X150CA-H |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X150CA-H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X150CA-H produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×150 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H Is Used
Pallet Transfer Gate
Actuates a swinging diverter gate on a packaging conveyor, using the CA pivot to absorb radial stress while providing 402N of push force at 0.5MPa.
Textile Yarn Guide
Traverses a yarn guide mechanism across a 150mm stroke, where the self-lubricating bearing and two-way grease-retaining seal prevent fiber contamination.
Carton Flap Folder
Folds corrugated cardboard flaps during case erecting, relying on the fixed rubber bumper to dampen the 346N retract impact at 0.5MPa.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H with MBL32X150CA-H
To replace the MAL32X150CA-H, order the MBL32X150CA-H to retain the exact 32mm bore, 150mm stroke, PT port thread, and CA pivot back cover. The CA clevis allows the cylinder to swing on a pin, which is essential for accommodating arcing loads over the 150mm stroke. If you need to step down force, the 25mm bore provides 245N push at 0.5MPa; to step up, the 40mm bore yields 628N push at 0.5MPa. Because this SKU has no -S magnet, it cannot accept a CS1-M or DS1-M sensor; if position detection is required, order an MBL32X150CA-S replacement and migrate to the modern CMSG, DMSG, or EMSG switch family. The 150mm stroke exceeds the 300mm threshold, so the 12mm rod is susceptible to bending under side loads; use an external guide rail or ensure the CA pivot absorbs the radial stress. Remember that the fixed rubber bumper is not an adjustable cushion, so explore the MBLC variant if precise end-of-stroke deceleration is needed. Also, a plain cylinder does not hold its load when air pressure drops, so install an external rod lock or pilot-operated check valve for safety.
Upgrade checklist
- ✓ Order the MBL32X150CA-H (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X150CA-H instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H FAQ
Yes, the MAL32X150CA-H is discontinued. The exact drop-in replacement is the MBL32X150CA-H, offering the same 32mm bore, 150mm stroke, CA pivot, and G1/8 port. The MBL upgrades the body to a riveted rolling-packed design instead of threaded covers.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa it provides 563N push. The maximum theoretical force is 82kgf at 1.0MPa. Because this specific SKU lacks an -S magnet, it cannot accept CS1-M or DS1-M sensors; for detection, order an MBL32X150CA-S and use CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X150CA-H replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150CA-H → MBL32X150CA-H)
Tell us the quantity and destination — we quote the drop-in MBL32X150CA-H replacement with price, stock and lead time, usually within 7-8 hours.