This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X155CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X155CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X155CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke155 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X155CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA
The AirTAC MAL32X155CA is a discontinued double-acting aluminum mini round cylinder. It delivers a 402 N push and 346 N pull at 0.5 MPa from its 32 mm bore. The exact drop-in replacement is the MBL32X155CA, matching the stroke, G1/8 port, and CA pivot mount. This legacy unit uses a carbon-steel rod with 20 um hard chrome plating and a heterogeneous two-way seal that retains grease.
This SKU lacks a -S magnet, so it cannot take a position sensor. The original MAL uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Both share a fixed rubber bumper, but if you need adjustable end-of-stroke cushioning, you must step up to the MBLC variant on the current line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X155CA |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X155CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X155CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×155 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA Is Used
Textile Loom Guide Arm
Drives a pivoting guide arm on a textile loom, using the CA clevis to accommodate the arcing motion while providing 402 N of push force at 0.5 MPa.
Bottling Line Diverter
Pushes a mechanical diverter gate on a bottling conveyor, where the 155 mm stroke provides enough travel to reroute standard glass containers.
Woodworking Clamp Press
Applies secondary clamping pressure on a small woodworking press, relying on the 346 N pull force to retract the jaw quickly.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA with MBL32X155CA
To replace this MAL32X155CA, order the MBL32X155CA. Confirm the 32 mm bore, 155 mm stroke, G1/8 port, PT thread, and CA pivot back cover. Because this unit has no -S magnet, it cannot accept a CS1-M or DS1-M sensor; if you need position detection, switch to an MBL32X155SCA and use the current CMSG, DMSG, or EMSG switches. The CA pivot is essential for arcing loads, allowing the cylinder to swing on a pin.
If you need to resize, step down to the 25 mm bore (245 N push @0.5 MPa) or up to the 40 mm bore (628 N push @0.5 MPa). At 155 mm stroke, the 12 mm rod has low side-load tolerance; use the CA pivot or an external guide to prevent rod bending. A plain MBL does not hold a load when air is lost, so add an external rod lock for vertical applications. The fixed rubber bumper softens impact but is not an adjustable cushion.
Upgrade checklist
- ✓ Order the MBL32X155CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X155CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA FAQ
Yes, the MAL32X155CA is discontinued. The exact drop-in replacement is the MBL32X155CA, which shares the same 32 mm bore, 155 mm stroke, G1/8 port, and CA pivot mount.
The 32 mm bore generates 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X155CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X155CA → MBL32X155CA)
Tell us the quantity and destination — we quote the drop-in MBL32X155CA replacement with price, stock and lead time, usually within 7-8 hours.