This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X15CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X15CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X15CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke15 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X15CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA
The AirTAC MAL32X15CA is a discontinued double-acting compact aluminum mini round cylinder. It delivers 402 N push and 346 N pull force at 0.5 MPa through a 32 mm bore and 15 mm stroke. The exact drop-in replacement is the MBL32X15CA, matching the bore, stroke, force, G1/8 port, and CA pivot mounting.
This legacy unit features a Ø12 mm carbon-steel rod with 20 um hard chrome plating and a heterogeneous two-way grease-retaining seal. Because this SKU lacks the -S option, it cannot accept a position sensor. The original MAL body used threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for the same ratings.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X15CA |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X15CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X15CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×15 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA Is Used
Textile Loom Tensioner
Uses the 402 N @0.5 MPa thrust to maintain yarn tension on a weaving loom, with the short 15 mm stroke providing rapid engagement.
Packaging Flap Folder
Folds cardboard carton flaps on a packaging line, where the CA pivot bracket accommodates the slight arcing motion during the fold.
PCB Edge Guide
Actuates a guide rail on a circuit board conveyor, using the compact 32 mm body to fit within tight machinery frames.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA with MBL32X15CA
To replace the MAL32X15CA, order the MBL32X15CA. Verify your 15 mm stroke, 32 mm bore, PT port thread, and CA pivot back cover. Since this unit has no -S magnet, you cannot mount a CS1-M or DS1-M sensor; if position detection is now required, upgrade to an MBL32X15CAS and use the current CMSG, DMSG, or EMSG switches.
If you need less force, step down to the 25 mm bore (245 N push @0.5 MPa). If you need more power, step up to the 40 mm bore (628 N push @0.5 MPa). The MAL uses a fixed rubber bumper, so for adjustable cushioning, specify the MBLC32 variant. A plain cylinder drifts when air is lost; use an external rod lock for position holding.
Upgrade checklist
- ✓ Order the MBL32X15CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X15CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA FAQ
Yes, the MAL32X15CA is discontinued. The exact drop-in replacement is the MBL32X15CA, which matches the 32 mm bore, 15 mm stroke, 402 N force, G1/8 port, and CA pivot mounting.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X15CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CA → MBL32X15CA)
Tell us the quantity and destination — we quote the drop-in MBL32X15CA replacement with price, stock and lead time, usually within 7-8 hours.