This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X15CASDB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X15CASDB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X15CASDB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke15 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X15CASDB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB
The AirTAC MAL32X15CASDB is a discontinued compact double-acting aluminum mini round cylinder delivering 402 N of push force at 0.5 MPa. It features a 32 mm bore, a short 15 mm stroke, and a G1/8 port. AirTAC replaced this legacy unit with the MBL32X15CASDB, a true drop-in replacement retaining the exact same bore, stroke, output force, port size, and SDB mounting accessory.
This specific SKU includes a CA pivot back cover and an SDB pivot bracket to handle arcing loads. The original MAL body uses threaded front and back covers, whereas the newer MBL features a riveted rolling-packed body. Because this model lacks the -S suffix, it has no internal magnet and cannot accept a position sensor. The piston relies on a heterogeneous two-way seal that retains grease, and the carbon-steel rod has 20 um hard-chrome plating.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X15CASDB |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X15CASDB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X15CASDB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×15 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB Is Used
PCB Depaneling Saw
Pushes a carrier fixture forward 15 mm into a circular saw blade, using the 402 N thrust to hold the panel firmly against the cutting fence.
Connector Insertion Press
Drives a delicate pin header into a socket with a short 15 mm stroke, relying on the CA pivot to self-align during the pressing arc.
Carton Flap Breaker
Knocks folded minor flaps open on a packaging line, where the SDB pivot bracket absorbs the side shock of striking the cardboard.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB with MBL32X15CASDB
To replace the MAL32X15CASDB, order the MBL32X15CASDB. Confirm the 32 mm bore, 15 mm stroke, G1/8 port, PT thread, CA pivot back cover, and SDB pivot bracket. Since this SKU has no -S magnet, it cannot support a sensor; if position detection is needed, move to an MBL32X15S variant and use the current CMSG, DMSG, or EMSG switches instead of the older CS1-M/DS1-M. The MAL uses a fixed rubber bumper; for adjustable air cushioning, step up to the MBLC equivalent.
If you need to resize, stepping down to a 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628 N. A plain bumper does not hold position if air pressure drops; install an external rod lock for suspended loads. The 15 mm stroke keeps side-load risk minimal, but the 12 mm rod still requires external guidance for off-center forces.
Upgrade checklist
- ✓ Order the MBL32X15CASDB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X15CASDB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X15CASDB, which matches the 32 mm bore, 15 mm stroke, G1/8 port, and SDB pivot mounting. The newer MBL uses a riveted body instead of threaded covers.
At 0.5 MPa it provides 402 N push and 346 N pull. At 0.7 MPa the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X15CASDB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15CASDB → MBL32X15CASDB)
Tell us the quantity and destination — we quote the drop-in MBL32X15CASDB replacement with price, stock and lead time, usually within 7-8 hours.