This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X15SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X15SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X15SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke15 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X15SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA
The AirTAC MAL32X15SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 15mm stroke. It delivers 402N push and 346N pull at 0.5MPa using a G1/8 port. The exact drop-in replacement is the MBL32X15SCA, matching the bore, stroke, output force, port, and CA pivot mounting.
This legacy SKU features a built-in magnet (-S) for position sensing, originally pairing with CS1-M or DS1-M switches. The modern MBL upgrade transitions to a riveted rolling-packed body from the older threaded front and back covers, and requires CMSG, DMSG, or EMSG sensors. The 12mm carbon-steel rod has 20um hard-chrome plating, guided by a self-lubricating bearing. A fixed rubber bumper absorbs end-of-stroke impact, though a plain cylinder drifts when air is lost.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X15SCA |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X15SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X15SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×15 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA Is Used
Textile Loom Guide
Shifts a yarn guide arm with 402N push at 0.5MPa, using the 15mm stroke for rapid, tight oscillations in a weaving machine.
PCB Component Press
Seats through-hole connectors on circuit boards, relying on the 12mm hard-chrome rod and self-lubricating bearing for precise 15mm travel.
Pivot Gate Diverter
Swings a small package diverter gate using the CA clevis back cover, allowing the cylinder to articulate safely during the 15mm arc.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA with MBL32X15SCA
To replace the MAL32X15SCA, order the MBL32X15SCA. Verify your PT tapered port thread, the CA pivot back cover for arcing loads, and the -S magnet. Upgrading means your CS1-M/DS1-M sensors must change to the CMSG/DMSG/EMSG family. If you need adjustable air cushioning instead of the fixed rubber bumper, step up to the MBLC series.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. Since this is a short 15mm stroke, side-load risk is minimal, but always confirm an external rod lock is necessary if you must hold a load during an air pressure drop.
Upgrade checklist
- ✓ Order the MBL32X15SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X15SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA FAQ
Yes, the MAL32X15SCA is discontinued. The exact drop-in replacement is the MBL32X15SCA, offering identical 32mm bore, 15mm stroke, G1/8 port, and CA pivot mounting. You must upgrade your CS1-M/DS1-M sensors to the CMSG/DMSG/EMSG family.
At 0.5MPa, push force is 402N and pull is 346N. At 0.7MPa, push is 563N. The maximum theoretical force is 82kgf at 1.0MPa. Operating speed ranges from 30-800mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X15SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X15SCA → MBL32X15SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X15SCA replacement with price, stock and lead time, usually within 7-8 hours.