This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X160-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X160-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X160-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X160-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM
The AirTAC MAL32X160-CM is a discontinued double-acting aluminum mini round cylinder delivering 402 N of push force at 0.5 MPa. It features a 32 mm bore, a 160 mm stroke, and a CM round-end back cover. AirTAC replaced this legacy series with the MBL32X160-CM, a direct drop-in replacement retaining the exact bore, stroke, output force, G1/8 port, and CM mounting interface.
This SKU lacks a built-in magnet, meaning it cannot accept position sensors. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body for structural rigidity. Internally, the piston relies on a heterogeneous two-way seal that retains grease, running alongside a self-lubricating front-cover bearing guide and a hard-chrome plated carbon-steel rod.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X160-CM |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X160-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X160-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM Is Used
Textile Loom Tensioning
Provides 402 N of push force to articulate the tensioning arms on textile weaving equipment, utilizing the CM round-end cover to accommodate slight arc movements during the 160 mm stroke.
PCB Router Clamping
Secures printed circuit board panels during routing operations, where the compact 32 mm aluminum body fits neatly within dense electronics manufacturing fixtures.
Package Diverter Gate
Actuates a routing flap on a packaging conveyor, moving light cardboard cartons with a 346 N pull force while the round-end mount absorbs pivot stress.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM with MBL32X160-CM
To replace the MAL32X160-CM, order the MBL32X160-CM, confirming the 32 mm bore, 160 mm stroke, G1/8 port, and CM round-end back cover. Because this specific SKU has no -S magnet, it cannot support a position sensor; if switch detection is required, you must step up to an MBL32X160S-CM and use the current CMSG, DMSG, or EMSG switch family instead of the older CS1-M or DS1-M sensors. If you need to adjust the bore size, stepping down to a 25 mm cylinder yields 245 N push force at 0.5 MPa, while stepping up to a 40 mm bore provides 628 N. The MAL uses a fixed rubber bumper; for adjustable air cushioning, specify the current-line MBLC equivalent. Note that a plain cylinder does not hold its load when air pressure drops. At 160 mm, side-load tolerance is moderate due to the 12 mm rod, so ensure the CM round-end pivot is properly aligned to prevent rod bending.
Upgrade checklist
- ✓ Order the MBL32X160-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X160-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM FAQ
Yes, the MAL32X160-CM is discontinued. The exact drop-in replacement is the MBL32X160-CM, which matches the 32 mm bore, 160 mm stroke, G1/8 port, and CM round-end mounting. The newer MBL uses a riveted rolling-packed body instead of the older threaded covers, but the performance ratings are identical.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot use CS1-M or DS1-M sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X160-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-CM → MBL32X160-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X160-CM replacement with price, stock and lead time, usually within 7-8 hours.