This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X160-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X160-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X160-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X160-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM
The AirTAC MAL32X160-S-CM is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, utilizing a 12 mm carbon-steel rod with 20 um hard-chrome plating guided by a self-lubricating front-cover bearing. AirTAC replaced this legacy unit with the MBL32X160-S-CM, a true drop-in replacement retaining the exact 32 mm bore, 160 mm stroke, G1/8 port, and CM round-end back cover.
This specific SKU includes a built-in magnet (-S) for position detection. On the original MAL body—which used threaded front and back covers—the magnet pairs with older CS1-M or DS1-M reed switches. When upgrading to the riveted rolling-packed MBL body, you must transition to the current CMSG, DMSG, or EMSG sensor family. The cylinder relies on a fixed rubber bumper for end-of-stroke deceleration, while the piston employs a heterogeneous two-way seal that retains grease for prolonged operational life.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X160-S-CM |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X160-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X160-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM Is Used
Packaging Conveyor Diverter
Pushes light cartons at 402 N push force, using the 160 mm stroke to clear the belt path before retracting.
PCB Router Clamp
Holds a printed circuit board panel during routing, relying on the 346 N pull force to maintain grip against tool vibration.
Bottle Sorting Gate
Directs plastic bottles into filling lanes, where the CM round-end cover pivots smoothly to absorb slight misalignments.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM with MBL32X160-S-CM
To replace the MAL32X160-S-CM, order the MBL32X160-S-CM. Verify your 160 mm stroke requirement, the G1/8 port, the default PT tapered thread, and the CM round-end back cover. Because this SKU includes the -S magnet, plan to swap your existing CS1-M or DS1-M switches for CMSG, DMSG, or EMSG sensors to fit the MBL body. If your application requires adjustable air cushioning rather than a fixed rubber bumper, step up to the MBLC series on the current line.
For sizing flexibility, stepping down to a 25 mm bore reduces push force to 245 N at 0.5 MPa, while stepping up to a 40 mm bore increases it to 628 N. At 160 mm of stroke, the 12 mm rod is susceptible to bending under lateral stress; use the CM round-end cover with a mating clevis to accommodate arcing motion, or add an external guide rail to absorb side loads. Note that a plain cylinder does not hold position if air pressure drops—the bumper softens impact but acts as no lock.
Upgrade checklist
- ✓ Order the MBL32X160-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X160-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM FAQ
Yes, the MAL32X160-S-CM is discontinued. The exact drop-in replacement is the MBL32X160-S-CM, which matches the 32 mm bore, 160 mm stroke, G1/8 port, and CM mounting. You will need to update your position sensors, as the MBL uses CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa operating pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X160-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160-S-CM → MBL32X160-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X160-S-CM replacement with price, stock and lead time, usually within 7-8 hours.