This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X160CMLB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X160CMLB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X160CMLB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X160CMLB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB
The AirTAC MAL32X160CMLB is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 160mm stroke. It delivers 402N push and 346N pull at 0.5 MPa, utilizing a 12mm carbon-steel rod with 20um hard chrome plating. The exact drop-in replacement is the MBL32X160CMLB, matching the force, G1/8 port, and LB mounting exactly.
This legacy SKU features a CM round-end back cover and an LB foot mounting bracket for rigid positioning. Because it lacks the -S magnet, it cannot accept a position sensor. The original MAL uses threaded front and back covers, whereas the current MBL upgrade features a riveted rolling-packed body. Both rely on a fixed rubber bumper, meaning the rod drifts when air is lost and cannot hold a load.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X160CMLB |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X160CMLB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X160CMLB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB Is Used
Package Flap Folding
Provides 402N of push force across 160mm to fold cardboard box flaps on a packaging conveyor, where the LB foot mount ensures rigid alignment.
Small Part Ejection
Ejects light aluminum stampings from a press die using 346N pull force, with the CM round-end allowing slight pivot if the rod binds.
Drawer Pusher
Pushes parts bins out of a tight storage rack over a 160mm extension, relying on the self-lubricating bearing guide to handle the motion.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB with MBL32X160CMLB
To replace the MAL32X160CMLB, order the MBL32X160CMLB and verify your CM round-end back cover, LB foot mount, and PT tapered port threads. Since this SKU has no -S magnet, you cannot mount a sensor; if detection is needed, order an MBL32X160S and use the current CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M. If you need an adjustable air cushion rather than the fixed rubber bumper, step up to the MBLC line.
For sizing, the 32mm bore provides 402N push at 0.5 MPa. If you need less force, step down to the 25mm bore (245N push). If you need more power, step up to the 40mm bore (628N push). At 160mm stroke, the 12mm rod is susceptible to bending under side loads; use an external guide rail or ensure the LB foot mount is perfectly aligned to prevent premature seal wear.
Upgrade checklist
- ✓ Order the MBL32X160CMLB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X160CMLB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB FAQ
Yes, the MAL32X160CMLB is discontinued. The exact drop-in replacement is the MBL32X160CMLB, which matches the 32mm bore, 160mm stroke, force, G1/8 port, CM round-end, and LB foot mounting. The main upgrade is a riveted rolling-packed body instead of the original threaded covers.
At 0.5 MPa, the push force is 402N and the pull force is 346N. At 0.7 MPa, the push force is 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X160CMLB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X160CMLB → MBL32X160CMLB)
Tell us the quantity and destination — we quote the drop-in MBL32X160CMLB replacement with price, stock and lead time, usually within 7-8 hours.