This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X164CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X164CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 164mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X164CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke164 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X164CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA
The AirTAC MAL32X164CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 164mm stroke. It delivers 402N push and 346N pull at 0.5MPa, using a G1/8 port and an M10x1.25 rod thread. The exact drop-in replacement is the MBL32X164CA, matching the force, port, and mounting.
This legacy CA pivot model swings on a pin for arcing loads, unlike a flat-end U cover. The older MAL uses threaded front and back covers, whereas the MBL upgrade features a riveted rolling-packed body. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X164CA |
| Bore size | Ø32 mm |
| Stroke | 164 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X164CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X164CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×164 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA Is Used
Flow Wrapper End-Seal
Drives the rotary knife on a 402N flow wrapper to cut film at 0.5 MPa, where the 164mm stroke clears the sealing anvil.
Seed Hopper Gate
Opens a pivot-mounted diverter on a planter, using the CA clevis to absorb arcing motion while metering seed flow.
Pallet Deflector Arm
Pushes errant cartons on a 32mm bore conveyor line, relying on the fixed bumper to soften the 164mm extension impact.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA with MBL32X164CA
To replace the MAL32X164CA, order the MBL32X164CA. Confirm the 32mm bore, 164mm stroke, G1/8 port, and PT thread. The CA pivot back cover must be retained for arcing loads. If you need a sensor, note this SKU has no magnet; stepping up to an -S variant changes the switch family from CS1-M/DS1-M to CMSG/DMSG/EMSG.
For sizing, stepping down to a 25mm bore yields 245N push at 0.5MPa, while stepping up to a 40mm bore provides 628N. The 164mm stroke requires a side-load guide; the CA pivot helps, but external support prevents rod bending. The fixed rubber bumper is not a lock—use an external rod lock to hold loads. For adjustable cushioning, use the MBLC.
Upgrade checklist
- ✓ Order the MBL32X164CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X164CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA FAQ
Yes, the MAL32X164CA is discontinued. The exact drop-in replacement is the MBL32X164CA, which matches the 32mm bore, 164mm stroke, 402N force, G1/8 port, and CA pivot mounting.
At 0.5 MPa it pushes 402N and pulls 346N; at 0.7 MPa it pushes 563N, with a max 82 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X164CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X164CA → MBL32X164CA)
Tell us the quantity and destination — we quote the drop-in MBL32X164CA replacement with price, stock and lead time, usually within 7-8 hours.