This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X175-CM-LB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X175-CM-LB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X175-CM-LB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke175 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X175-CM-LB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB
The AirTAC MAL32X175-CM-LB is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 175 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, peaking at 82 kgf at 1.0 MPa. The exact drop-in replacement is the MBL32X175-CM-LB, which matches the original bore, stroke, output force, G1/8 port, and LB foot mounting for a seamless swap.
This legacy SKU features a CM round-end back cover paired with an LB foot mounting bracket. Because this configuration lacks the -S magnet option, it cannot support any position sensing. The original MAL body used threaded front and back covers, whereas the modern MBL upgrade features a riveted rolling-packed body for enhanced structural integrity. Both designs rely on a fixed rubber bumper to soften end-of-stroke impacts, though an adjustable air cushion is available on the current MBLC line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X175-CM-LB |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X175-CM-LB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X175-CM-LB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×175 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB Is Used
Pouch End-Sealing Jaws
Drives the 175 mm stroke on vertical form-fill-seal packaging equipment, providing 402 N of push force to close polymer pouch sealing jaws.
PCB Router Z-Axis
Lowers a spindle on automated PCB depaneling routers, using the 32 mm bore's 346 N pull force to retract the cutting tool safely.
Carton Flap Folder
Actuates flap-folding mechanisms on small carton erecting lines, where the CM round-end accommodates slight geometric misalignment during the fold cycle.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB with MBL32X175-CM-LB
To replace the MAL32X175-CM-LB, order the MBL32X175-CM-LB. Confirm your 32 mm bore, 175 mm stroke, G1/8 port, and PT tapered thread are correct. The CM round-end back cover and LB foot bracket must be retained. Since this SKU has no -S magnet, you cannot mount a position sensor; if you need sensing, switch to an MBL32X175S-CM-LB and migrate to CMSG/DMSG/EMSG switches instead of the legacy CS1-M/DS1-M. The fixed rubber bumper is not adjustable; for heavy loads, step up to the MBLC variant. A plain MBL does not hold position when air is lost, so add an external rod lock for vertical loads.
For sizing flexibility, stepping down to the 25 mm bore drops the push force to 245 N at 0.5 MPa, while stepping up to the 40 mm bore increases it to 628 N. With a 175 mm stroke, the 12 mm rod has low side-load tolerance; use the LB foot bracket with an external guide rail to prevent rod bending.
Upgrade checklist
- ✓ Order the MBL32X175-CM-LB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X175-CM-LB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB FAQ
Yes, the MAL32X175-CM-LB is discontinued. The exact drop-in replacement is the MBL32X175-CM-LB, which matches the 32 mm bore, 175 mm stroke, 82 kgf max force, G1/8 port, and LB foot mounting.
At 0.5 MPa it provides 402 N push and 346 N pull force, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot support position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X175-CM-LB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-CM-LB → MBL32X175-CM-LB)
Tell us the quantity and destination — we quote the drop-in MBL32X175-CM-LB replacement with price, stock and lead time, usually within 7-8 hours.