This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X175-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X175-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X175-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke175 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X175-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA
The AirTAC MAL32X175-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 175 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X175-S-CA, which matches the original bore, stroke, output force, G1/8 port, and CA pivot mounting. The legacy MAL uses a threaded front and back cover assembly, whereas the current MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU includes a built-in magnet (-S) and a CA pivot back cover. The magnet allows for rod position detection using older CS1-M or DS1-M reed switches, though the MBL replacement upgrades this to the current CMSG, DMSG, or EMSG sensor families. The CA clevis back cover is designed to swing on a pin, accommodating arcing loads. Internally, the piston relies on a heterogeneous two-way seal that retains grease, while a self-lubricating bearing guide in the front cover supports the Ø12 mm carbon-steel rod with 20 um hard-chrome plating.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X175-S-CA |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X175-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X175-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×175 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA Is Used
Pouch Packaging Diverter
Swings a diverter arm on a packaging line to sort pouches. The 402 N push force at 0.5 MPa easily moves light product, while the CA pivot absorbs the arcing motion of the arm.
Textile Yarn Guide
Traverses a yarn guide across a winding drum. The 175 mm stroke covers the drum width, and the CS1-M compatible magnet confirms the guide's end positions for speed synchronization.
PCB Tray Ejector
Pushes loaded circuit board trays out of an inspection station. The compact 32 mm aluminum body fits tight machine cells, providing 346 N of pull force to retract the ejector pin.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA with MBL32X175-S-CA
To replace the MAL32X175-S-CA, order the MBL32X175-S-CA. Confirm the 32 mm bore, 175 mm stroke, G1/8 port, PT thread form, CA pivot back cover, and the magnet requirement. Because the -S magnet is present, note that your existing CS1-M or DS1-M switches will need to change to CMSG, DMSG, or EMSG sensors on the new MBL body. The MAL uses a fixed rubber bumper; if your application now requires an adjustable air cushion to decelerate this 175 mm stroke, step up to the MBLC32 series.
When sizing, verify if 32 mm is the correct force class. Stepping down to a 25 mm bore reduces push force to 245 N at 0.5 MPa, while stepping up to a 40 mm bore increases it to 628 N. At 175 mm of travel, the relatively small Ø12 mm rod has limited side-load tolerance. The CA pivot bracket helps absorb misalignment, but for rigid radial loads you should add an external guide. Remember that a plain cylinder does not hold position if air pressure drops; the bumper only softens end-of-stroke impact and will not lock the load.
Upgrade checklist
- ✓ Order the MBL32X175-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X175-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X175-S-CA. It matches the 32 mm bore, 175 mm stroke, G1/8 port, and CA pivot mounting. The main change is the body construction (riveted rolling-packed on the MBL vs threaded covers on the MAL) and the sensor family (CMSG/DMSG/EMSG on the MBL vs CS1-M/DS1-M on the MAL).
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The theoretical maximum force is 82 kgf at 1.0 MPa. It operates on filtered air at 0.1-1.0 MPa, runs at 30-800 mm/s, and uses a fixed rubber bumper rather than an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X175-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175-S-CA → MBL32X175-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X175-S-CA replacement with price, stock and lead time, usually within 7-8 hours.