This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X175SCMLB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X175SCMLB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X175SCMLB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke175 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X175SCMLB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB
The AirTAC MAL32X175SCMLB is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 175mm stroke, delivering 402N of push force at 0.5MPa. It features a built-in magnet (-S) for position detection, a CM round-end back cover, and an LB foot mounting bracket. AirTAC ended this series, making the MBL32X175SCMLB the exact drop-in replacement—it matches the original force, G1/8 port, and PT thread form perfectly.
This legacy unit relies on a fixed rubber bumper for end-of-stroke damping rather than an adjustable air cushion; if you need shock tuning, the current MBLC line provides that feature. The older MAL body used threaded front and back covers sealed to the barrel, whereas the modern MBL utilizes a riveted rolling-packed body. Furthermore, the -S magnet on this cylinder functions with the legacy CS1-M and DS1-M reed switches, while the MBL successor transitions to the current CMSG, DMSG, and EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X175SCMLB |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X175SCMLB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X175SCMLB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×175 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB Is Used
Diverting Cartons on Packaging Lines
Uses the 402N push force at 0.5MPa to deflect small cardboard cartons on a conveyor belt, with the 175mm stroke providing ample travel to clear the belt path.
PCB Test Fixture Actuation
Moves a testing probe head into position over electronic boards, relying on the -S magnet and CS1-M sensor to confirm the fully extended test position.
Pushing Totes from Storage
Ejects plastic storage totes from gravity flow racks, where the LB foot mount anchors the cylinder firmly against the repeated lateral impact of package transfer.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB with MBL32X175SCMLB
To replace the MAL32X175SCMLB, order the MBL32X175SCMLB, ensuring you retain the 32mm bore, 175mm stroke, G1/8 port, PT thread, CM round-end cover, and LB foot mount. If your application requires less force, step down to a 25mm bore cylinder (providing 245N push at 0.5MPa); if you need more power, step up to a 40mm bore (delivering 628N push at 0.5MPa). Because the 175mm stroke generates leverage on the 12mm rod, use the LB foot bracket to secure the body and add an external guide to prevent rod bending under side loads. Note that the fixed rubber bumper is not a locking device; the rod will drift if air pressure is lost, so install a pilot-operated check valve if you must hold a load mid-stroke.
Upgrade checklist
- ✓ Order the MBL32X175SCMLB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X175SCMLB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB FAQ
Yes, the MAL32X175SCMLB is discontinued. The exact drop-in replacement is the MBL32X175SCMLB, which matches the 32mm bore, 175mm stroke, G1/8 port, CM round-end, and LB foot mount. The MBL body uses a riveted rolling-packed design instead of the older threaded covers, and its magnet requires CMSG or DMSG sensors instead of the legacy CS1-M.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force increases to 563N. The maximum theoretical force is 82kgf at 1.0MPa. The cylinder operates at 30-800mm/s and uses a fixed rubber bumper, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X175SCMLB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X175SCMLB → MBL32X175SCMLB)
Tell us the quantity and destination — we quote the drop-in MBL32X175SCMLB replacement with price, stock and lead time, usually within 7-8 hours.