This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X180U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X180U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X180U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke180 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X180U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U
The AirTAC MAL32X180U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 180mm stroke. It delivers 402N of push force and 346N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X180U, which matches the original bore, stroke, output force, G1/8 port, and U flat-end mounting. You can order the MBL equivalent to keep your machine running without redesigning the mount.
This legacy SKU features a U flat-end back cover for rigid rear mounting and uses the default PT tapered port thread. Because this specific code lacks the -S suffix, it has no internal magnet and cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Both designs rely on a fixed rubber bumper to soften end-of-stroke impacts, as neither offers an adjustable air cushion. If your equipment requires shock absorption beyond a rubber bumper, the current-line MBLC variant offers an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X180U |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X180U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X180U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×180 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U Is Used
Bottle Capping Diverter
Actuates a routing flap on a packaging line conveyor to divert capped beverage bottles into a labeling station, utilizing the 402N push force to overcome guide-rail friction.
Small Part Ejector
Pushes stamped metal brackets out of a die set on a mechanical power press, using the 180mm stroke to clear the tooling area completely before the next cycle.
Carton Stopper Gate
Extends a rigid stop block on a gravity roller conveyor to halt cardboard shipping cartons at a packing station, relying on the U flat-end cover for firm rear anchoring.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U with MBL32X180U
To replace the MAL32X180U, order the MBL32X180U. Confirm your 32mm bore, 180mm stroke, G1/8 port, PT thread, and U flat-end back cover before checkout. If you need to adjust the bore size, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push at 0.5 MPa. Because this SKU lacks the -S magnet, it cannot support a sensor; if you need position detection, order an MBL with the -S suffix and upgrade to the current CMSG, DMSG, or EMSG switch family, as the older CS1-M and DS1-M sensors are obsolete. A plain cylinder does not hold its load when air pressure drops, so add an external rod lock or pilot-operated check valve if gravity or drift poses a risk. At 180mm stroke, the 12mm rod has moderate side-load tolerance, but you should use an external guide rail for heavy offset loads. If end-of-stroke shock is too harsh for the fixed rubber bumper, step up to the MBLC for an adjustable air cushion.
Upgrade checklist
- ✓ Order the MBL32X180U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X180U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U FAQ
Yes, the MAL32X180U is discontinued. The exact drop-in replacement is the MBL32X180U, which shares the same 32mm bore, 180mm stroke, 402N push force, G1/8 port, and U flat-end mounting. You can install the MBL directly into your existing fixture.
At 0.5 MPa, the 32mm bore provides 402N of push force and 346N of pull force. At 0.7 MPa, the push force is 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific model lacks the -S suffix, it has no internal magnet and cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X180U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X180U → MBL32X180U)
Tell us the quantity and destination — we quote the drop-in MBL32X180U replacement with price, stock and lead time, usually within 7-8 hours.