This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X185CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X185CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X185CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke185 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X185CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA
The AirTAC MAL32X185CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 185mm stroke. It delivers 402N push and 346N pull at 0.5MPa using a G1/8 port. AirTAC replaced this legacy unit with the MBL32X185CA, a drop-in alternative retaining the exact bore, stroke, force, port, and CA pivot mounting.
This legacy unit features a fixed rubber bumper and a carbon-steel rod with 20um hard chrome plating. Because this specific SKU lacks the -S suffix, it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for enhanced structural integrity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X185CA |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X185CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X185CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×185 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA Is Used
Pouch Packaging Diverter
Uses the 402N push at 0.5MPa to deflect pouches on a packaging line, with the CA pivot absorbing the slight arcing motion of the 185mm swing.
Textile Loom Tensioner
Moves a yarn guide bar 185mm with 346N pull force, relying on the self-lubricating front-cover bearing to maintain smooth motion at high cycle rates.
Carton Flap Folder
Actuates a folding arm on a case erector where the fixed rubber bumper adequately absorbs the 185mm stroke impact without adjustable cushioning.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA with MBL32X185CA
To replace the MAL32X185CA, order the MBL32X185CA. Verify your G1/8 port, PT thread, and CA pivot back cover. The CA clevis swings on a pin to absorb arcing loads, which is critical for this 185mm stroke. If you need position sensing, the MBL requires CMSG/DMSG/EMSG switches, as the older CS1-M/DS1-M sensors do not cross over. If a softer end-of-stroke stop is required, step up to the MBLC for an adjustable air cushion.
For sizing flexibility, stepping down to the 25mm bore drops thrust to 245N push at 0.5MPa, while stepping up to the 40mm bore increases push force to 628N at 0.5MPa and upgrades the port to G1/4. Since the stroke is 185mm, the 12mm rod has low side-load tolerance; use an external guide rail to prevent rod bending. A plain bumper is not a lock, so use an external rod lock to hold loads safely.
Upgrade checklist
- ✓ Order the MBL32X185CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X185CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA FAQ
Yes, the MAL32X185CA is discontinued. The exact drop-in replacement is the MBL32X185CA, which matches the 32mm bore, 185mm stroke, G1/8 port, and CA pivot mount. The MBL uses a riveted rolling-packed body instead of threaded covers.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa it provides 563N push, with a maximum theoretical force of 82kgf at 1.0MPa. Because this specific SKU lacks the -S magnet suffix, it cannot accept a position sensor; the -S version requires CS1-M/DS1-M switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X185CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185CA → MBL32X185CA)
Tell us the quantity and destination — we quote the drop-in MBL32X185CA replacement with price, stock and lead time, usually within 7-8 hours.