This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X185SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X185SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X185SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke185 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X185SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA
The AirTAC MAL32X185SCA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. It delivers a push force of 402 N and a pull force of 346 N at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X185SCA, a drop-in alternative that matches the 32 mm bore, 185 mm stroke, G1/8 port, and CA pivot mounting exactly.
This SKU includes a built-in magnet (-S) for position detection. During the upgrade, the sensor family changes: the older MAL works with CS1-M or DS1-M switches, while the current MBL requires CMSG, DMSG, or EMSG models. Additionally, the legacy MAL uses threaded front and back covers, whereas the MBL features a riveted rolling-packed body. Both designs share a fixed rubber bumper and a self-lubricating front-cover bearing guide that supports the 12 mm carbon-steel rod.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X185SCA |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X185SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X185SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×185 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA Is Used
Textile Loom Let-Off
Uses the 402 N push force to tension fabric webs, while the CA pivot accommodates the angular travel of the let-off linkage.
Package Divert Arm
Extends 185 mm to push cartons between sorting lanes, relying on the self-lubricating bearing to handle rapid cycling.
Bottle Lane Guide
Adjusts guide rails for different container widths on a filling line, with the -S magnet confirming the open or closed position.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA with MBL32X185SCA
To replace the MAL32X185SCA, order the MBL32X185SCA. Confirm your port thread form (PT default, G, or NPT) and ensure you switch to CMSG, DMSG, or EMSG sensors for the magnet. If your application requires an adjustable air cushion rather than the standard fixed rubber bumper, step up to the MBLC series on the current line. At 185 mm stroke, side-load stress is moderate, but the CA pivot back cover helps by swinging on a pin to absorb arcing loads.
For sizing flexibility, you can step down to a 25 mm bore (providing 245 N push at 0.5 MPa) if your load is lighter, or step up to a 40 mm bore (delivering 628 N push at 0.5 MPa) for heavier resistance. Remember that a plain bumper does not hold position if air pressure drops; install an external rod lock for suspended loads.
Upgrade checklist
- ✓ Order the MBL32X185SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X185SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA FAQ
Yes, the MAL32X185SCA is discontinued. The exact drop-in replacement is the MBL32X185SCA, which matches the 32 mm bore, 185 mm stroke, G1/8 port, and CA pivot mounting. You simply order the MBL equivalent.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X185SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X185SCA → MBL32X185SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X185SCA replacement with price, stock and lead time, usually within 7-8 hours.