This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X190CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X190CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X190CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke190 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X190CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA
The AirTAC MAL32X190CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 190mm stroke. It delivers 402N push and 346N pull force at 0.5MPa, peaking at 563N push at 0.7MPa. The exact drop-in replacement is the MBL32X190CA, matching the bore, stroke, G1/8 port, and CA mounting exactly.
This legacy unit features a CA pivot clevis back cover designed to swing on a pin for arcing loads. Because this SKU lacks an -S magnet, it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Both rely on a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X190CA |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X190CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X190CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×190 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA Is Used
Textile Loom Yarn Guide
Shifts a yarn guide carriage across a 190mm path, utilizing the 402N push force at 0.5MPa to maintain tension while the CA clevis absorbs pivot stress.
Carton Flap Folder
Folds minor flaps on a packaging line within a tight machine envelope, where the compact 32mm aluminum body and 346N pull force easily retract the arm.
Bottle Divert Gate
Actuates a 190mm swing gate to divert bottles on a conveyor, relying on the CA pivot back cover to accommodate the arcing motion of the linkage.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA with MBL32X190CA
To replace the MAL32X190CA, order the MBL32X190CA. Verify your 190mm stroke, G1/8 port, PT thread, and CA pivot back cover. Since this SKU has no -S magnet, you cannot mount a sensor; if you need position detection, upgrade to an MBL32X190SCA and use the modern CMSG, DMSG, or EMSG switches instead of the legacy CS1-M or DS1-M. If you need adjustable air cushioning rather than a fixed rubber bumper, step up to the MBLC32 series.
For sizing, stepping down to a 25mm bore drops the force to 245N push at 0.5MPa, while stepping up to a 40mm bore increases it to 628N push. At 190mm of stroke, the 12mm carbon-steel rod has limited side-load tolerance; use the CA pivot to absorb misalignment or add an external guide rail to prevent rod bending. A plain cylinder does not hold a load when air is lost, so add an external rod lock for vertical applications.
Upgrade checklist
- ✓ Order the MBL32X190CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X190CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X190CA. It matches the 32mm bore, 190mm stroke, G1/8 port, and CA pivot mounting, but uses a modern riveted rolling-packed body instead of threaded covers.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa it provides 563N push, with a theoretical maximum of 82kgf at 1.0MPa. This specific SKU lacks a magnet, so it cannot accept CS1-M or DS1-M sensors; you must order an -S variant for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X190CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X190CA → MBL32X190CA)
Tell us the quantity and destination — we quote the drop-in MBL32X190CA replacement with price, stock and lead time, usually within 7-8 hours.