This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X200-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X200-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X200-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X200-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA
The AirTAC MAL32X200-S-CA is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, operating on a 32 mm bore with a 200 mm stroke. The exact drop-in replacement is the MBL32X200-S-CA, which matches the bore, stroke, output force, G1/8 port, and CA mounting exactly. The legacy MAL uses threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU includes a built-in magnet (-S) and a CA pivot back cover. The magnet on the MAL works with older CS1-M or DS1-M reed switches, but upgrading to the MBL means switching to current CMSG, DMSG, or EMSG sensors. The CA clevis mount allows the cylinder to swing on a pin, which is critical for absorbing arcing motion. The rod is 12 mm carbon steel with 20 um hard chrome plating, guided by a self-lubricating front-cover bearing. End-of-stroke energy is absorbed by a fixed rubber bumper, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X200-S-CA |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X200-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X200-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA Is Used
Packaging Flap Folder
Swings a hinged arm to fold cardboard carton flaps at 402 N of push force, using the CA pivot bracket to accommodate the changing arc of the linkage during the 200 mm stroke.
Textile Fabric Guide
Shifts a fabric guide roll back and forth across a 200 mm weaving width, relying on the 346 N pull force and the self-lubricating bearing to run continuously at high speeds.
Palletizing Diverter
Pushes small product cartons into a secondary lane at 563 N when running at 0.7 MPa, utilizing the CA clevis to prevent binding as the diverter arm pivots.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA with MBL32X200-S-CA
To replace the discontinued MAL32X200-S-CA, order the MBL32X200-S-CA. Confirm your 32 mm bore, 200 mm stroke, G1/8 port, and PT tapered thread. The CA pivot back cover must be retained to handle arcing loads. Because this SKU has an -S magnet, you must upgrade your position sensing from the old CS1-M / DS1-M switches to the MBL-compatible CMSG / DMSG / EMSG family. The fixed rubber bumper softens end-of-stroke impacts, but if your application requires adjustable air cushioning, step up to the MBLC variant on the current line. A plain cylinder does not hold a load when air is lost; the rod will drift, so add an external rod lock for vertical safety.
For sizing flexibility, you can step down to a 25 mm bore (245 N push @0.5 MPa) for lighter loads, or up to a 40 mm bore (628 N push @0.5 MPa) for higher force. Because the 200 mm stroke is substantial for a 12 mm rod, side-load tolerance is low. Use the CA pivot to your advantage by ensuring the clevis pin aligns with the load path, or add an external guide rail to prevent rod bending and premature seal wear.
Upgrade checklist
- ✓ Order the MBL32X200-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X200-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA FAQ
Yes, the MAL32X200-S-CA is discontinued. The exact drop-in replacement is the MBL32X200-S-CA, offering the same 32 mm bore, 200 mm stroke, G1/8 port, and CA pivot mount. The MBL upgrades the body from threaded covers to a riveted rolling-packed design, and you must update your sensors from the old CS1-M / DS1-M to the CMSG / DMSG / EMSG family.
At 0.5 MPa, it provides 402 N push and 346 N pull force. At 0.7 MPa, push increases to 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. End-of-stroke deceleration is handled by a fixed rubber bumper; it is not an adjustable cushion. If you need adjustable air cushioning, order the MBLC equivalent.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X200-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-CA → MBL32X200-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X200-S-CA replacement with price, stock and lead time, usually within 7-8 hours.