This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X200-S-U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X200-S-U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X200-S-U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X200-S-U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U
The AirTAC MAL32X200-S-U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 200mm stroke. It delivers 402N push and 346N pull at 0.5MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. The exact drop-in replacement is the MBL32X200-S-U, matching the bore, stroke, force, port, and U flat-end mounting. The legacy MAL uses a threaded front and back cover, whereas the modern MBL features a riveted rolling-packed body.
This unit includes a built-in magnet (-S) for position sensing and a U flat-end back cover for rigid rear mounting. The -S magnet on the MAL interfaces with older CS1-M or DS1-M reed switches, while the MBL replacement upgrades to CMSG, DMSG, or EMSG solid-state sensors. The piston relies on a heterogeneous two-way seal that retains grease, and the carbon-steel rod has 20um hard-chrome plating to resist wear. A fixed rubber bumper absorbs end-of-stroke impact, as the original MAL line lacks adjustable air cushions.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X200-S-U |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X200-S-U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X200-S-U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U Is Used
Pouch Packaging Diverter
Pushes lightweight cardboard cartons on a packaging conveyor at 402N push force, using the 200mm stroke to clear the belt path completely.
CNC Lathe Door Opener
Slides a machine tool safety door open and closed; the U flat-end mount handles the rigid axial pull of 346N without pivot slop.
PCB Test Fixture Clamp
Holds a printed circuit board in place during automated optical inspection, using the -S magnet to confirm clamp engagement via a reed switch.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U with MBL32X200-S-U
To replace the MAL32X200-S-U, order the MBL32X200-S-U. Confirm the 32mm bore, 200mm stroke, G1/8 port, and PT tapered thread are correct for your fittings. The U flat-end back cover provides rigid mounting, so ensure your frame is square. Because this SKU has the -S magnet, you must upgrade your sensors: the older CS1-M/DS1-M switches will not fit the new body, so use CMSG, DMSG, or EMSG switches on the MBL. If your application requires adjustable end-cushioning to stop heavy loads, step up to the MBLC32 variant, as the MAL only has a fixed rubber bumper.
For sizing flexibility, step down to the 25mm bore (245N push at 0.5MPa) if your load is lighter, or step up to the 40mm bore (628N push at 0.5MPa) for higher force. At 200mm stroke, side-load stress is moderate, but the 12mm rod has low side-load tolerance; use an external guide rail to prevent rod bending. Note that a plain MAL or MBL cylinder does not hold position when air is lost—the rod will drift. Use an external rod lock for safety.
Upgrade checklist
- ✓ Order the MBL32X200-S-U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X200-S-U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U FAQ
Yes, the AirTAC MAL32X200-S-U is discontinued. The exact drop-in replacement is the MBL32X200-S-U, which matches the 32mm bore, 200mm stroke, G1/8 port, and U flat-end mounting. The MBL uses a riveted body instead of threaded covers, and you must switch from CS1-M/DS1-M sensors to CMSG/DMSG/EMSG sensors.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa. It uses a fixed rubber bumper, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X200-S-U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200-S-U → MBL32X200-S-U)
Tell us the quantity and destination — we quote the drop-in MBL32X200-S-U replacement with price, stock and lead time, usually within 7-8 hours.