This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X200CAY — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X200CAY in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X200CAY, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X200CAY
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY
The AirTAC MAL32X200CAY is a discontinued double-acting aluminum mini round cylinder delivering 402 N of push force at 0.5 MPa. The exact drop-in replacement is the MBL32X200CAY, matching the 32 mm bore, 200 mm stroke, G1/8 port, and CA pivot mounting. The legacy MAL uses threaded front and back covers, whereas the current MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU includes a CA pivot back cover designed to swing on a pin, accommodating arcing loads without binding. It lacks a built-in magnet (-S), meaning it cannot accept CS1-M or DS1-M position sensors. Internally, a heterogeneous two-way seal retains grease, and the 12 mm carbon-steel rod features 20 um hard-chrome plating for wear resistance.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X200CAY |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X200CAY carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X200CAY produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY Is Used
Pivot Arm Diverter
Uses the CA clevis to swing a 402 N push force diverter arm on a packaging conveyor, absorbing radial stress during 200 mm travel arcs.
Textile Loom Tensioner
Actuates a tensioning jig in a textile machine, relying on the 346 N pull force at 0.5 MPa to maintain yarn tension across a 200 mm stroke.
Carton Flap Folder
Folds corrugated carton flaps in a tight-space packing cell where the compact 32 mm aluminum body fits between guide rails.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY with MBL32X200CAY
To replace the MAL32X200CAY, order the MBL32X200CAY. Verify your 200 mm stroke, G1/8 port, and PT thread form. The CA clevis mounting is retained exactly. If your application requires position sensing, note that this non-magnet SKU cannot support a sensor; you would need to specify an -S version on the MBL order, which transitions you to the current CMSG / DMSG / EMSG switch family. If sizing up or down, the 25 mm bore offers 245 N push at 0.5 MPa, while the 40 mm bore provides 628 N.
At 200 mm of stroke, the 12 mm rod has moderate side-load tolerance; ensure the CA pivot absorbs radial loads or add an external guide. The fixed rubber bumper softens end-of-stroke impact but is not an adjustable cushion—if you need end-of-stroke deceleration control, step up to the MBLC variant on the current line. A plain cylinder does not hold position when air is lost, so add a pilot-operated check valve for load holding.
Upgrade checklist
- ✓ Order the MBL32X200CAY (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X200CAY instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY FAQ
Yes, the MAL32X200CAY is discontinued. The exact drop-in replacement is the MBL32X200CAY, offering the same 32 mm bore, 200 mm stroke, G1/8 port, and CA pivot mounting.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X200CAY replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X200CAY → MBL32X200CAY)
Tell us the quantity and destination — we quote the drop-in MBL32X200CAY replacement with price, stock and lead time, usually within 7-8 hours.