This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X20SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X20SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X20SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke20 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X20SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA
The AirTAC MAL32X20SCA is a discontinued double-acting aluminum mini round cylinder engineered for compact actuation. It features a 32mm bore and a 20mm stroke, generating 402N of push force and 346N of pull force at 0.5MPa. The exact drop-in replacement is the MBL32X20SCA, which matches the original bore, stroke, output force, G1/8 port, and CA pivot mounting for a seamless upgrade.
This legacy SKU includes a built-in magnet (-S) for position sensing and a CA pivot back cover that swings on a pin to absorb arcing loads. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Buyers should note the -S magnet on this MAL works with older CS1-M or DS1-M switches, while the MBL replacement requires current CMSG, DMSG, or EMSG sensors.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X20SCA |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X20SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X20SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×20 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA Is Used
Package Divert Gate
Drives a short 20mm pivot arm on a packaging conveyor to deflect small parcels, utilizing the 402N push force at 0.5MPa and the CA clevis to accommodate the swing arc.
PCB Test Socket
Actuates a testing probe head in an electronics manufacturing line, where the compact 32mm aluminum body fits tight cell boundaries and the magnet confirms retraction.
Bin Flap Opener
Pivots a discharge flap on a small parts hopper, relying on the CA pivot to handle the radial stress of the swinging flap during material dispensing.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA with MBL32X20SCA
To replace the MAL32X20SCA, order the MBL32X20SCA and verify your 32mm bore, 20mm stroke, G1/8 port, and PT tapered thread form. Confirm the CA pivot back cover is retained for your arcing load application, and plan for a sensor swap: the legacy -S magnet pairs with CS1-M or DS1-M switches, but the MBL uses CMSG, DMSG, or EMSG sensors. If your application requires an adjustable air cushion instead of the standard fixed rubber bumper, step up to the current-line MBLC variant.
For sizing flexibility, stepping down to the 25mm bore yields 245N of push force at 0.5MPa, while stepping up to the 40mm bore provides 628N at 0.5MPa. Remember that a plain MAL or MBL cylinder does not hold its position when air is lost; the rod will drift, so use an external rod lock or pilot-operated check valve for critical load-holding tasks.
Upgrade checklist
- ✓ Order the MBL32X20SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X20SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA FAQ
Yes, the MAL32X20SCA is discontinued. The exact drop-in replacement is the MBL32X20SCA, offering identical 32mm bore, 20mm stroke, output force, G1/8 port, and CA pivot mounting. You must only update your sensors, as the MBL uses CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M.
The 32mm bore provides 402N of push force and 346N of pull force at 0.5MPa. At 0.7MPa, the push force is 563N, with a maximum theoretical force of 82kgf at 1.0MPa. It features a 12mm carbon-steel rod with M10x1.25 threading, operates at 0.1-1.0MPa, and runs at speeds of 30-800mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X20SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X20SCA → MBL32X20SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X20SCA replacement with price, stock and lead time, usually within 7-8 hours.