This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X210U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X210U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X210U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X210U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U
The AirTAC MAL32X210U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 210mm stroke. It delivers 402N push and 346N pull at 0.5MPa, making it a mid-range actuator for compact automation. The exact drop-in replacement is the MBL32X210U, matching the bore, stroke, output force, G1/8 port, and flat-end U back cover for a seamless swap.
This SKU features a U flat-end back cover for rigid rear mounting and lacks a magnet, meaning it cannot support position sensing. The original MAL body uses threaded front and back covers, whereas the MBL upgrade features a riveted rolling-packed body. Both share a fixed rubber bumper for end-of-stroke deceleration; if you need an adjustable air cushion, you must step up to the current MBLC line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X210U |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X210U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X210U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×210 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U Is Used
PCB Conveyor Diverters
Provides 402N push at 0.5MPa to actuate routing gates on PCB conveyor lines, fitting within tight 32mm frame envelopes.
Carton Ejector Arms
Uses the 210mm stroke to push small packaging cartons off a processing belt at high cycle rates without requiring a large profile body.
Textile Tensioning Jaws
Applies 346N pull force to maintain precise tension on textile threads, leveraging the self-lubricating front-cover bearing for smooth operation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U with MBL32X210U
To replace the MAL32X210U, order the MBL32X210U and verify your 32mm bore, 210mm stroke, G1/8 port, and PT tapered thread. Because this SKU has no -S magnet, it cannot accept a sensor; if you need position feedback, order an MBL32X210US and note the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG. If you need a softer stop than the fixed rubber bumper provides, look at the MBLC variant for adjustable air cushioning.
For sizing flexibility, stepping down to a 25mm bore yields 245N push at 0.5MPa, while stepping up to a 40mm bore provides 628N push. At 210mm stroke, the 12mm rod has limited side-load tolerance; use an external guide rail or a pivot mount to prevent rod bending. Note that a plain cylinder drifts when air is lost, so add an external rod lock for vertical load holding.
Upgrade checklist
- ✓ Order the MBL32X210U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X210U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U FAQ
Yes, the MAL32X210U is discontinued. The exact drop-in replacement is the MBL32X210U, which matches the 32mm bore, 210mm stroke, 82kgf max force, G1/8 port, and flat-end U back cover. The MBL uses a riveted rolling-packed body instead of the older threaded covers.
At 0.5MPa it delivers 402N push and 346N pull; at 0.7MPa it delivers 563N push, with a theoretical max of 82kgf at 1.0MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; you would need the MBL32X210US and CMSG/DMSG/EMSG switches for detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X210U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X210U → MBL32X210U)
Tell us the quantity and destination — we quote the drop-in MBL32X210U replacement with price, stock and lead time, usually within 7-8 hours.