This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X215SU — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X215SU in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 215mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X215SU, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke215 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X215SU
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU
The AirTAC MAL32X215SU is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 215mm stroke. It delivers 402N push and 346N pull force at 0.5 MPa, utilizing a 12mm carbon-steel rod with 20um hard chrome plating. The exact drop-in replacement is the MBL32X215SU, matching the bore, stroke, force, G1/8 port, and flat-end U back cover.
This legacy SKU features a built-in -S magnet for position sensing. The older MAL body uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Additionally, the -S magnet on this discontinued unit works with legacy CS1-M and DS1-M switches, while upgrading to the MBL requires switching to the modern CMSG, DMSG, or EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X215SU |
| Bore size | Ø32 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X215SU carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X215SU produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×215 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU Is Used
Package Diverter Gate
Actuates a pneumatic flap on a logistics sorting line, using the 402N push force at 0.5 MPa to deflect medium-weight parcels into secondary chutes.
CNC Lathe Door Operator
Opens and closes a sliding safety enclosure on a CNC turning center, where the 215mm stroke accommodates the full door travel distance.
Carton Flap Folder
Folds top flaps on a packaging machine prior to sealing, relying on the self-lubricating front-cover bearing guide to handle the repetitive horizontal motion.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU with MBL32X215SU
To replace the MAL32X215SU, order the MBL32X215SU. Confirm the 32mm bore, 215mm stroke, PT thread, G1/8 port, and the rigid flat-end U back cover are correct for your mounting setup. Because this SKU includes the -S magnet, you must upgrade your legacy CS1-M or DS1-M sensors to CMSG, DMSG, or EMSG switches to match the MBL body. If your application requires an adjustable air cushion instead of the standard fixed rubber bumper, step up to the MBLC32 variant on the current line.
For sizing, the next size down is the 25mm bore (245N push at 0.5 MPa) and the next size up is the 40mm bore (628N push at 0.5 MPa). With a 215mm stroke, the 12mm rod is vulnerable to bending under side loads; use an external guide rail or a pivot mount to prevent premature seal wear. Note that this cylinder does not hold its position if air pressure is lost; add an external rod lock or pilot-operated check valve for fail-safe load holding.
Upgrade checklist
- ✓ Order the MBL32X215SU (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X215SU instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU FAQ
Yes, the MAL32X215SU is discontinued. The exact drop-in replacement is the MBL32X215SU, which matches the 32mm bore, 215mm stroke, 402N push force, G1/8 port, and flat-end U back cover. You must upgrade any CS1-M or DS1-M sensors to the CMSG, DMSG, or EMSG switch families for the MBL.
The 32mm bore generates 402N push and 346N pull at 0.5 MPa, 563N push at 0.7 MPa, and a maximum theoretical force of 82kgf at 1.0 MPa. It uses a fixed rubber bumper at end-of-stroke and does not have an adjustable cushion; for adjustable air cushioning, use the current MBLC32 model.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X215SU replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X215SU → MBL32X215SU)
Tell us the quantity and destination — we quote the drop-in MBL32X215SU replacement with price, stock and lead time, usually within 7-8 hours.