This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X230SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X230SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X230SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X230SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA
The AirTAC MAL32X230SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 230mm stroke. It delivers 402N push and 346N pull at 0.5MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. The exact drop-in replacement is the MBL32X230SCA, which matches the bore, stroke, force, port, and CA pivot mounting for a seamless swap.
This legacy unit features a built-in magnet (-S) for position sensing and a CA pivot back cover designed for arcing loads. The original MAL body uses threaded front and back covers, whereas the current MBL upgrade utilizes a riveted rolling-packed body. Additionally, the -S magnet on this MAL works with older CS1-M or DS1-M switches, while the MBL replacement requires the newer CMSG, DMSG, or EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X230SCA |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X230SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X230SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×230 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA Is Used
Pivot-Arm Diverter
Swings a 230mm stroke to push small parcels between sorting chutes at 402N push force using the CA clevis.
PCB Edge Guiding
Uses the 32mm bore to align circuit boards on a moving conveyor, relying on the -S magnet and CS1-M switch for position feedback.
Textile Yarn Guide
Pivots to tension and route delicate threads, absorbing minor angular misalignment through the CA pivot mount.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA with MBL32X230SCA
To replace the MAL32X230SCA, order the MBL32X230SCA and confirm the G1/8 port, PT thread, and CA pivot back cover. The CA clevis allows the cylinder to swing on a pin, which is ideal for accommodating arcing side-loads. Because this is a 230mm stroke, the 12mm rod is susceptible to bending under lateral stress; ensure an external guide rail supports the load. If you need to step down, the 25mm bore provides 245N push at 0.5MPa, while stepping up to the 40mm bore yields 628N push at 0.5MPa. Note that the fixed rubber bumper softens end-of-stroke impact but does not lock the load; if position holding is required when air is lost, install an external pilot-operated check valve. For adjustable air cushioning, upgrade to the MBLC series.
Upgrade checklist
- ✓ Order the MBL32X230SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X230SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA FAQ
Yes, the MAL32X230SCA is discontinued. The exact drop-in replacement is the MBL32X230SCA, offering the same 32mm bore, 230mm stroke, 402N push at 0.5MPa, G1/8 port, and CA pivot mounting.
At 0.5MPa it pushes 402N and pulls 346N; at 0.7MPa it pushes 563N, with a maximum theoretical force of 82kgf at 1.0MPa. The -S magnet works with legacy CS1-M or DS1-M switches, but the MBL replacement requires CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X230SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X230SCA → MBL32X230SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X230SCA replacement with price, stock and lead time, usually within 7-8 hours.