This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X25-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X25-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X25-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X25-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM
The AirTAC MAL32X25-S-CM is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 25 mm stroke, delivering 402 N of push force at 0.5 MPa. It is directly replaced by the MBL32X25-S-CM. This drop-in successor matches the exact bore, force, G1/8 port, and CM mounting interface, allowing seamless machine integration without redesign.
This legacy SKU includes a built-in magnet (-S) for position detection via older CS1-M or DS1-M reed switches, whereas the modern MBL replacement utilizes the current CMSG, DMSG, or EMSG sensor family. The original MAL body features threaded front and back covers, while the updated MBL uses a riveted rolling-packed construction. Internally, a heterogeneous two-way seal retains grease, and the carbon-steel rod is plated with 20 um hard chrome to resist wear in compact assemblies.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X25-S-CM |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X25-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X25-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM Is Used
PCB Drill Bit Changer
Provides 402 N of push force at 0.5 MPa to actuate the tool-changing gate in compact CNC routing spindles.
Carton Flap Folder
Uses the 25 mm short stroke and CM round-end mount to tuck minor flaps on packaging lines before tape sealing.
Connector Insertion Press
Drives delicate pin headers into sockets, relying on the -S magnet and CS1-M sensor to confirm seating depth.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM with MBL32X25-S-CM
To replace the MAL32X25-S-CM, order the MBL32X25-S-CM. Verify your 12 mm rod thread (M10x1.25), G1/8 port, and CM round-end back cover. Because this SKU has the -S magnet, you must upgrade your sensors from the legacy CS1-M / DS1-M series to the modern CMSG / DMSG / EMSG switches. The MAL uses a fixed rubber bumper; if your application requires adjustable end-cushioning to decelerate moving masses, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to a 25 mm bore reduces thrust to 245 N at 0.5 MPa, while stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. Note that a plain cylinder does not hold its position if air pressure drops; the bumper only softens the stroke end. For vertical loads requiring fail-safe holding, add an external rod lock or pilot-operated check valve.
Upgrade checklist
- ✓ Order the MBL32X25-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X25-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X25-S-CM, matching the 32 mm bore, 25 mm stroke, G1/8 port, and CM round-end back cover. You must swap your old CS1-M or DS1-M sensors for the CMSG, DMSG, or EMSG series to work with the MBL magnet.
At 0.5 MPa it provides 402 N push and 346 N pull. At 0.7 MPa the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa operating pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X25-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-S-CM → MBL32X25-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X25-S-CM replacement with price, stock and lead time, usually within 7-8 hours.