This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X250-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X250-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X250-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke250 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X250-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA
The AirTAC MAL32X250-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 250mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa, utilizing a PT-tapered G1/8 port. The exact drop-in replacement is the MBL32X250-S-CA, which matches the original bore, stroke, output force, port size, and CA pivot mounting.
This legacy unit features a 12mm carbon-steel rod with 20um hard-chrome plating and a self-lubricating front-cover bearing guide. The -S magnet on the MAL works with older CS1-M / DS1-M switches, while the MBL replacement transitions to the current CMSG / DMSG / EMSG sensor family. The original MAL uses threaded front and back covers, whereas the MBL upgrade uses a riveted rolling-packed body. Both designs rely on a fixed rubber bumper, so if adjustable end-cushioning is required for your application, you must step up to the MBLC variant on the current line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X250-S-CA |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X250-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X250-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×250 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA Is Used
Textile Loom Guide
Drives a thread guide arm across a 250mm path, using the 402N push force to shift bobbins while the CA pivot absorbs the lateral yarn tension.
Pallet Divert Arm
Swings a diverter gate on a compact packaging conveyor, relying on the 346N pull force to retract the mechanism clear of passing cartons.
Drawer Ejector
Pushes a parts drawer open 250mm in an automated tool crib, where the self-lubricating bearing guide ensures smooth low-friction ejection.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA with MBL32X250-S-CA
To replace the MAL32X250-S-CA, order the MBL32X250-S-CA. Confirm your 32mm bore, 250mm stroke, G1/8 port, PT thread, and CA pivot back cover. The CA clevis allows the cylinder body to swing on a pin, which is essential for managing arcing motion paths. Because the -S magnet is present, remember that your legacy CS1-M / DS1-M switches will not fit the MBL; you must upgrade to CMSG / DMSG / EMSG sensors.
For sizing flexibility, the next size down is the 25mm bore (245N push at 0.5MPa), and the next size up is the 40mm bore (628N push at 0.5MPa). At 250mm of travel, the 12mm rod is highly susceptible to side-load bending; ensure the CA pivot absorbs the misalignment or add an external guide rail. A plain bumper does not hold position if air pressure drops, so add an external rod lock for fail-safe load holding. If end-of-stroke impact is too harsh, switch to the MBLC for adjustable air cushions.
Upgrade checklist
- ✓ Order the MBL32X250-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X250-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA FAQ
Yes, the MAL32X250-S-CA is discontinued. The exact drop-in replacement is the MBL32X250-S-CA, offering the same 32mm bore, 250mm stroke, CA pivot, G1/8 port, and output force. The MBL uses a riveted rolling-packed body instead of threaded covers, and you must upgrade your sensors from CS1-M / DS1-M to CMSG / DMSG / EMSG models.
At 0.5MPa, the 32mm bore provides 402N push and 346N pull force. At 0.7MPa, it delivers 563N push. The maximum theoretical force is 82kgf at 1.0MPa. It operates at 30-800mm/s with a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X250-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X250-S-CA → MBL32X250-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X250-S-CA replacement with price, stock and lead time, usually within 7-8 hours.