This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X25CASDB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X25CASDB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X25CASDB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X25CASDB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB
The AirTAC MAL32X25CASDB is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 25mm stroke. It delivers a robust 402N push and 346N pull force at 0.5MPa, utilizing a 12mm carbon-steel rod with 20um hard-chrome plating. Because this legacy series has reached end-of-life, AirTAC engineered the MBL32X25CASDB as the exact drop-in replacement, matching the bore, stroke, output force, G1/8 port, and SDB mounting.
This specific SKU features a CA pivot back cover and an SDB pivot bracket, allowing the body to swing on a pin to absorb arcing mechanical loads. The original MAL body used threaded front and back covers alongside a self-lubricating front-cover bearing guide and a heterogeneous two-way grease-retaining seal. Note that this configuration lacks a built-in magnet, meaning it cannot accept a position sensor. The fixed rubber bumper softens end-of-stroke impacts, though it does not lock the rod in place if air pressure is lost.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X25CASDB |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X25CASDB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X25CASDB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB Is Used
Packaging Divert Arms
Drives a 25mm pivot arm on a packaging conveyor to deflect flat cartons into a secondary taping station, utilizing the 402N push force to overcome friction.
Textile Yarn Guides
Shifts a ceramic yarn guide across a textile warping machine, where the CA clevis and SDB bracket accommodate the slight arcing motion of the thread path.
Small Component Ejection
Pushes molded plastic caps out of an injection mold cavity, relying on the 25mm stroke and self-lubricating bearing for millions of rapid cycles.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB with MBL32X25CASDB
To replace the MAL32X25CASDB, order the MBL32X25CASDB. It offers true drop-in compatibility, retaining the 32mm bore, 25mm stroke, PT tapered port thread, CA pivot cover, and SDB pivot bracket. If your application requires an adjustable air cushion to mitigate end-of-stroke shock, step up to the current-line MBLC variant, as the legacy MAL only features a fixed rubber bumper. Furthermore, because this specific SKU lacks the -S magnet, it cannot support a position sensor; if you need position feedback, order the MBL32X25CASDBS and use the modern CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M sensors.
For sizing flexibility, you can step down to the 25mm bore (delivering 245N push at 0.5MPa) for lighter duties, or step up to the 40mm bore (providing 628N push at 0.5MPa) for heavier loads. Remember that a plain cylinder does not hold its load when air is lost; the rod will drift. For vertical or suspended loads, install an external pilot-operated check valve or a dedicated rod lock.
Upgrade checklist
- ✓ Order the MBL32X25CASDB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X25CASDB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X25CASDB. It matches the 32mm bore, 25mm stroke, 82kgf max force, G1/8 port, CA pivot cover, and SDB mounting bracket. The newer MBL body uses a riveted rolling-packed design instead of the older threaded covers.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force is 563N. The theoretical maximum force is 82kgf at 1.0MPa. This SKU has no -S magnet, so it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X25CASDB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CASDB → MBL32X25CASDB)
Tell us the quantity and destination — we quote the drop-in MBL32X25CASDB replacement with price, stock and lead time, usually within 7-8 hours.