This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X25CAT — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X25CAT in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X25CAT, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X25CAT
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT
The AirTAC MAL32X25CAT is a discontinued, double-acting compact aluminum mini round cylinder. In its 32mm bore class, it delivers a 402N push and 346N pull at 0.5 MPa. It has been superseded by the MBL32X25CAT, a drop-in replacement retaining the exact same stroke, force, G1/8 port, and NPT thread.
This specific SKU features a CA pivot back cover for arcing loads and lacks a magnet, meaning it cannot support a position sensor. The legacy MAL uses threaded front and back covers, whereas the MBL upgrade features a riveted rolling-packed body. Both rely on a fixed rubber bumper, so if adjustable cushioning is needed, the MBLC variant is required.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X25CAT |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X25CAT carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X25CAT produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT Is Used
Packaging Flap Folder
Drives a pivot arm at 402N to fold corrugated cardboard flaps during high-speed case sealing, utilizing the CA clevis to accommodate the arc.
Diverter Gate Actuator
Pushes a routing gate on a packaging conveyor line, where the 346N pull force reliably retracts the diverter against product flow resistance.
PCB Test Socket
Applies downward clamping pressure on an in-circuit test fixture, using the 25mm stroke to rapidly engage and release electronic test probes.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT with MBL32X25CAT
To replace the MAL32X25CAT, order the MBL32X25CAT to match the 32mm bore, 25mm stroke, CA pivot cover, and NPT thread. If you need to downsize, the 25mm bore offers 245N push at 0.5 MPa; to upsize, the 40mm bore provides 628N. Because this SKU lacks an -S magnet, it cannot accept a sensor. If position detection is needed, order an MBL32X25SCAT, which uses the modern CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M. Note that the rubber bumper is not a lock; use an external rod lock to hold loads.
Upgrade checklist
- ✓ Order the MBL32X25CAT (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X25CAT instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT FAQ
Yes, the MAL32X25CAT is discontinued. The exact drop-in replacement is the MBL32X25CAT, which matches the 32mm bore, 25mm stroke, CA pivot cover, NPT thread, and 402N force.
At 0.5 MPa, it pushes 402N and pulls 346N; at 0.7 MPa it pushes 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X25CAT replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25CAT → MBL32X25CAT)
Tell us the quantity and destination — we quote the drop-in MBL32X25CAT replacement with price, stock and lead time, usually within 7-8 hours.