This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X260SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X260SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X260SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X260SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA
The AirTAC MAL32X260SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 260mm stroke, delivering 402N of push force at 0.5MPa. The exact drop-in replacement is the MBL32X260SCA, matching the bore, stroke, force, G1/8 port and CA mounting exactly. This legacy unit features a Ø12mm carbon-steel rod with 20μm hard-chrome plating and a heterogeneous two-way seal that retains grease for long service life.
This SKU includes a CA pivot back cover designed to swing on a pin for arcing loads, and an -S magnet for position detection. Because the MAL body uses older threaded front and back covers, upgrading to the riveted rolling-packed MBL body is highly recommended. Furthermore, the legacy -S magnet pairs with older CS1-M or DS1-M switches, whereas the modern MBL replacement utilizes the current CMSG, DMSG or EMSG sensor family.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X260SCA |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X260SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X260SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×260 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA Is Used
Pivot Arm Actuation
Leverages the CA clevis mount to drive a swinging sorting arm on a packaging line, using the 402N push force at 0.5MPa to divert parcels.
Product Rejector
Uses the 260mm stroke to push defective items off a moving conveyor belt, relying on the self-lubricating bearing guide to handle rapid cycling.
PCB Test Fixture
Moves an electronic testing probe array over a 260mm travel distance, using the -S magnet and CS1-M sensor to verify test head position.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA with MBL32X260SCA
To replace this MAL32X260SCA, order the MBL32X260SCA. Confirm the 32mm bore, 260mm stroke, PT tapered port thread, CA pivot back cover, and the -S magnet. Note that your existing CS1-M or DS1-M sensors will need to be upgraded to CMSG, DMSG or EMSG switches to match the new MBL. If your application requires adjustable end-of-stroke cushioning, the fixed rubber bumper on this legacy model cannot do that; you should step up to the current MBLC variant instead.
For sizing flexibility, stepping down to a 25mm bore drops the push force to 245N at 0.5MPa, while stepping up to a 40mm bore increases it to 628N. Because this is a 260mm stroke, the small Ø12mm rod has limited side-load tolerance; you must use an external guide or rely on the CA clevis to absorb arcing loads. A plain cylinder does not hold its position when air is lost, so install an external rod lock for vertical loads.
Upgrade checklist
- ✓ Order the MBL32X260SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X260SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA FAQ
Yes, the MAL32X260SCA is discontinued. The exact drop-in replacement is the MBL32X260SCA, which matches the 32mm bore, 260mm stroke, G1/8 port, and CA pivot mount. You must upgrade your CS1-M or DS1-M sensors to the CMSG, DMSG or EMSG family for the new body.
At 0.5MPa it provides 402N push and 346N pull force. At 0.7MPa the push force is 563N, and the maximum theoretical force is 82kgf at 1.0MPa. It operates at 30-800mm/s with a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X260SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260SCA → MBL32X260SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X260SCA replacement with price, stock and lead time, usually within 7-8 hours.