This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X270SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X270SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X270SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke270 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X270SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA
The AirTAC MAL32X270SCA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Operating at 0.5 MPa, it generates 402 N of push force and 346 N of pull force over a 270 mm stroke. AirTAC replaced this legacy unit with the MBL32X270SCA, a drop-in alternative retaining the exact same 32 mm bore, G1/8 port, and CA pivot mounting.
This SKU includes a built-in magnet (-S) for position detection. During the upgrade to the MBL equivalent, the compatible sensor family shifts from the older CS1-M and DS1-M switches to the current CMSG, DMSG, or EMSG series. Additionally, the original MAL utilized threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for structural rigidity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X270SCA |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X270SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X270SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×270 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA Is Used
Textile Loom Let-Off
Guides yarn tensioning arms through a 270 mm arc using the CA pivot bracket, applying up to 402 N of push force to maintain consistent fabric weave density.
Pallet Diverting Gate
Actuates a routing flap along a packaging line, relying on the 32 mm bore's 563 N thrust at 0.7 MPa to push loaded pallets onto a secondary track.
Vertical Tray Stacker
Extends 270 mm to index empty trays in a food packaging machine, using the self-lubricating bearing guide to handle repetitive high-speed cycling.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA with MBL32X270SCA
To replace the MAL32X270SCA, order the MBL32X270SCA and verify your 32 mm bore, 270 mm stroke, PT thread, and CA pivot back cover. The CA clevis allows the cylinder to swing on a pin, which is crucial for accommodating arcing loads over the 270 mm travel. If your application requires less force, step down to the 25 mm bore offering 245 N push at 0.5 MPa; if you need more power, step up to the 40 mm bore providing 628 N push. Because this stroke exceeds 300 mm, the 12 mm rod is susceptible to bending under lateral stress—use an external guide rail to support the load. Note that the fixed rubber bumper softens end-of-stroke impact but does not hold the load if air pressure drops; install a pilot-operated check valve for position holding. If adjustable end-cushioning is required, upgrade to the MBLC variant on the current line.
Upgrade checklist
- ✓ Order the MBL32X270SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X270SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA FAQ
Yes, the MAL32X270SCA is discontinued. The exact drop-in replacement is the MBL32X270SCA, which matches the 32 mm bore, 270 mm stroke, G1/8 port, CA pivot mount, and force output. You simply order the MBL32X270SCA as a direct replacement.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this model includes the -S magnet, it works with older CS1-M and DS1-M switches; if you upgrade to the MBL32X270SCA, you must switch to CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X270SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X270SCA → MBL32X270SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X270SCA replacement with price, stock and lead time, usually within 7-8 hours.