This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X275SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X275SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X275SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke275 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X275SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM
The AirTAC MAL32X275SCM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 275mm stroke. It delivers 402N push and 346N pull at 0.5MPa, making it a robust choice for mid-range actuation. AirTAC replaced this legacy unit with the MBL32X275SCM, a drop-in alternative retaining the exact bore, stroke, force, G1/8 port, and CM round-end mounting.
This SKU includes a built-in magnet (-S) for position sensing and a CM round-end back cover. The original MAL body uses threaded front and back covers, whereas the current MBL features a riveted rolling-packed body. Additionally, the -S magnet on this MAL functions with older CS1-M or DS1-M switches, while the MBL replacement transitions to the modern CMSG, DMSG, or EMSG sensor family. The cylinder relies on a fixed rubber bumper for end-of-stroke damping and uses a heterogeneous two-way seal that retains grease.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X275SCM |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X275SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X275SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×275 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM Is Used
Cardboard Box Flap Folder
Provides 402N of push at 0.5MPa to fold heavy corrugated cardboard flaps on a continuous packaging conveyor, utilizing the 275mm stroke to clear the product path during retraction.
PCB Router Gate Diverter
Shifts a pneumatic gate to route printed circuit boards between inspection lanes, where the -S magnet and CS1-M switch verify gate position at high cycling speeds.
Pallet Component Pusher
Ejects stamped metal brackets from a sub-assembly fixture into a pallet chute, relying on the CM round-end cover to pivot slightly and accommodate misalignment.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM with MBL32X275SCM
To replace the MAL32X275SCM, order the MBL32X275SCM. Confirm your 32mm bore, 275mm stroke, G1/8 port, and PT thread form. The CM round-end back cover must be retained for your mounting interface. Because this SKU includes the -S magnet, plan to upgrade your legacy CS1-M or DS1-M sensors to the CMSG, DMSG, or EMSG switches used by the MBL. If your application requires an adjustable air cushion rather than a fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push. With a 275mm stroke, the 12mm rod is susceptible to bending under side loads; utilize the CM round-end pivot to absorb arcing motion or add an external guide rail. Note that a plain MBL does not hold its load if air pressure drops; use an external rod lock for fail-safe positioning.
Upgrade checklist
- ✓ Order the MBL32X275SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X275SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM FAQ
Yes, the MAL32X275SCM is discontinued. The exact drop-in replacement is the MBL32X275SCM, which matches the 32mm bore, 275mm stroke, G1/8 port, force, and CM round-end mounting. You must upgrade any existing CS1-M or DS1-M sensors to the CMSG, DMSG, or EMSG switch family for the MBL.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X275SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X275SCM → MBL32X275SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X275SCM replacement with price, stock and lead time, usually within 7-8 hours.