This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X280CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X280CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X280CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke280 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X280CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM
The AirTAC MAL32X280CM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 280mm stroke. It delivers 402N of push force at 0.5MPa and uses a G1/8 port. AirTAC replaced this legacy series with the MBL32X280CM, a drop-in alternative that preserves the exact bore, stroke, output force, port size, and CM round-end mounting. Because this specific SKU lacks an -S magnet, it cannot support any position sensing.
The original MAL body relied on threaded front and back covers, whereas the current MBL upgrade features a riveted rolling-packed body for enhanced structural integrity. Inside, the piston utilizes a heterogeneous two-way seal that retains grease, paired with a self-lubricating front-cover bearing guide. The carbon-steel rod has 20um hard-chrome plating to resist wear, though the fixed rubber bumper cannot hold the load in place if air pressure drops.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X280CM |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X280CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X280CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×280 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM Is Used
PCB router gate diverter
Actuates a routing flap on a printed circuit board depaneling machine, using the 402N push force at 0.5MPa to reliably shift panels between inspection and routing lanes.
Carton flap folder
Folds the minor side flaps on a compact case packing line, where the 280mm stroke provides the necessary reach and the CM round-end accommodates slight mechanical misalignment.
Bottle rejection arm
Pushs offset containers off a narrow conveyor belt in a beverage filling station, utilizing the 32mm bore's 563N force at 0.7MPa for swift ejection without stalling.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM with MBL32X280CM
To replace the MAL32X280CM, order the MBL32X280CM. Verify your 32mm bore, 280mm stroke, G1/8 port, and CM round-end back cover. This unit has no -S magnet, meaning it cannot accept a CS1-M or DS1-M sensor; if you need position detection on the new MBL, you must select an -S version and migrate to the current CMSG, DMSG, or EMSG switch family. The MAL relies on a fixed rubber bumper, so if your application requires adjustable end-of-stroke cushioning, step up to the MBLC variant on the current line.
When sizing this cylinder, you can step down to the 25mm bore (providing 245N push at 0.5MPa) for lighter duties, or step up to the 40mm bore (628N push at 0.5MPa) for heavier loads. Since the 280mm stroke is substantial, the 12mm rod has limited tolerance for side loads; use an external guide rail or pivot mount to prevent rod bending. A plain MBL will drift if air is lost, so deploy an external rod lock or pilot-operated check valve for position holding.
Upgrade checklist
- ✓ Order the MBL32X280CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X280CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM FAQ
Yes, the MAL32X280CM is discontinued. The exact drop-in replacement is the MBL32X280CM, which matches the 32mm bore, 280mm stroke, G1/8 port, and CM round-end mounting. The MBL upgrades the body to a riveted rolling-packed design while maintaining the same output force.
At 0.5MPa it provides 402N push and 346N pull force; at 0.7MPa it provides 563N push, with a maximum theoretical force of 82kgf at 1.0MPa. This specific SKU has no -S magnet, so it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X280CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280CM → MBL32X280CM)
Tell us the quantity and destination — we quote the drop-in MBL32X280CM replacement with price, stock and lead time, usually within 7-8 hours.