This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X280SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X280SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X280SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke280 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X280SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM
The AirTAC MAL32X280SCM is a discontinued double-acting aluminum mini round cylinder delivering 402 N of push force at 0.5 MPa. It features a 32 mm bore, 280 mm stroke, a G1/8 port, and a CM round-end back cover. AirTAC replaced this legacy unit with the MBL32X280SCM, a drop-in alternative that preserves the exact stroke, output force, port size, and mounting interface.
This SKU includes a built-in magnet (-S) for position detection. On the original MAL body, which used threaded front and back covers, this magnet pairs with older CS1-M or DS1-M switches. The MBL replacement features a riveted rolling-packed body and requires the current CMSG, DMSG, or EMSG sensor families. Both generations rely on a fixed rubber bumper rather than an adjustable cushion, though the modern MBLC variant adds an adjustable air cushion if end-of-stroke deceleration is critical.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X280SCM |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X280SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X280SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×280 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM Is Used
Pouch Packaging Diverter
Pushes lightweight cardboard cartons on a packaging line using 402 N of thrust at 0.5 MPa, with the 280 mm stroke providing ample travel to clear the conveyor belt.
PCB Router Ejector
Extends to eject routed circuit boards from a machining fixture, utilizing the CM round-end cover to accommodate slight angular misalignment during the transfer.
Textile Bobbin Loader
Transfers empty bobbins into a winding machine, where the self-lubricating front-cover bearing guide ensures smooth operation across 280 mm of continuous movement.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM with MBL32X280SCM
To replace the MAL32X280SCM, order the MBL32X280SCM. Confirm your 32 mm bore, 280 mm stroke, PT thread, and CM round-end back cover. Because this SKU has the -S magnet, you must also swap your legacy CS1-M or DS1-M reed switches for CMSG, DMSG, or EMSG sensors to match the MBL body. If your application requires adjustable end-cushioning to absorb kinetic energy, step up to the MBLC32X280SCM rather than relying on the standard fixed rubber bumper.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. At 280 mm of stroke, the 12 mm hard-chrome carbon steel rod is highly susceptible to side-load bending; use an external guide rail or pair the CM round-end with a pivot bracket to prevent rod damage. Remember that the bumper softens end stops but does not hold the load if air pressure drops.
Upgrade checklist
- ✓ Order the MBL32X280SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X280SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM FAQ
Yes, the MAL32X280SCM is discontinued. The exact drop-in replacement is the MBL32X280SCM, which matches the 32 mm bore, 280 mm stroke, G1/8 port, and CM round-end mounting. The main difference is the body construction: the MAL uses threaded covers, while the MBL uses a riveted rolling-packed body.
The 32 mm bore provides a push force of 402 N and a pull force of 346 N at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X280SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X280SCM → MBL32X280SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X280SCM replacement with price, stock and lead time, usually within 7-8 hours.