This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X290SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X290SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X290SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke290 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X290SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA
The AirTAC MAL32X290SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 290mm stroke, delivering 402N push and 346N pull at 0.5 MPa. AirTAC replaced it with the MBL32X290SCA, a drop-in alternative retaining the exact same G1/8 port, M10x1.25 rod thread, and CA pivot mounting to fit your existing fixture. The legacy MAL features threaded front and back covers, whereas the current MBL body uses a riveted rolling-packed construction for equally robust performance.
This specific SKU includes a built-in magnet (-S) for position detection. On the MAL, that magnet interfaces with the older CS1-M and DS1-M reed switches; upgrading to the MBL32X290SCA requires migrating to the modern CMSG, DMSG, or EMSG sensor family. Internally, the piston relies on a heterogeneous two-way seal that retains grease, while a self-lubricating bearing guide in the front cover supports the 12mm carbon-steel rod with its 20um hard-chrome plating.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X290SCA |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X290SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X290SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×290 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA Is Used
Pouch Packaging Diverter
Actuates a swing gate at 0.5 MPa to reroute sealed pouches on a packaging line, utilizing the 402N push force and CA pivot bracket to absorb arcing momentum.
Textile Yarn Guide
Traverses a ceramic yarn guide across a 290mm span at high speed, relying on the self-lubricating bearing to prevent rod binding during continuous duty.
Carton Flap Folder
Extends 290mm to fold secondary corrugated carton flaps, where the fixed rubber bumper safely absorbs the 346N pull impact at stroke end without marking the packaging.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA with MBL32X290SCA
To replace the MAL32X290SCA, order the MBL32X290SCA and verify your bore, 290mm stroke, PT port thread, and CA pivot back cover. Because this SKU uses the -S magnet, you must also swap your legacy CS1-M or DS1-M sensors for CMSG, DMSG, or EMSG switches when moving to the MBL. If your application needs adjustable end-of-stroke damping rather than the fixed rubber bumper found on the MAL, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push. At 290mm of travel, the 12mm rod is vulnerable to bending under lateral stress; use the CA clevis to allow arcing alignment or add an external guide rail. Finally, this cylinder drifts when air pressure is lost, so fit an external rod lock or pilot-operated check valve if the load must hold position.
Upgrade checklist
- ✓ Order the MBL32X290SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X290SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA FAQ
Yes, the MAL32X290SCA is discontinued. The exact drop-in replacement is the MBL32X290SCA, which matches the 32mm bore, 290mm stroke, G1/8 port, and CA pivot mounting. You must upgrade your CS1-M or DS1-M sensors to the CMSG, DMSG, or EMSG family for the new magnet.
At 0.5 MPa, the 32mm bore delivers 402N push and 346N pull. At 0.7 MPa, the push force is 563N. The theoretical maximum force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X290SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X290SCA → MBL32X290SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X290SCA replacement with price, stock and lead time, usually within 7-8 hours.