This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X300-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X300-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X300-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X300-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM
The AirTAC MAL32X300-CM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 300mm stroke. It delivers 402N push and 346N pull at 0.5MPa, operating at 30-800mm/s. The exact drop-in replacement is the MBL32X300-CM, matching the bore, stroke, force, G1/8 port, and CM round-end cover. This SKU lacks a magnet (-S), so it cannot accept a position sensor.
The legacy MAL uses threaded front and back covers, whereas the MBL upgrade features a riveted rolling-packed body. The 300mm stroke on a 12mm rod demands external guidance to prevent bending, as the fixed rubber bumper only softens end-of-stroke impacts without locking the load.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X300-CM |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X300-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X300-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM Is Used
PCB Conveyor Diverter
Pushes populated PCB panels down a 300mm lane at 402N, fitting the compact G1/8 port into tight conveyor frames.
Carton Sorting Gate
Extends 300mm to route small packaging cartons on a distribution line, using the CM round-end to tolerate slight pivot misalignment.
Chip Tray Ejector
Cycles 300mm to eject semiconductor wafer trays from a test bay, relying on the self-lubricating bearing for 30-800mm/s operation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM with MBL32X300-CM
To replace the MAL32X300-CM, order the MBL32X300-CM to retain the 32mm bore, 300mm stroke, PT thread, and CM round-end back cover. If you need position detection, you must move to an MBL32X300-S-CM; note that the newer MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M. If your application requires adjustable cushioning rather than a fixed bumper, step up to the MBLC equivalent.
For sizing flexibility, stepping down to a 25mm bore yields 245N push at 0.5MPa, while stepping up to a 40mm bore provides 628N push. A 300mm stroke on a 12mm rod is highly susceptible to side-load damage; always use an external guide or pivot to prevent rod bending. Furthermore, a plain cylinder drifts when air is lost, so add a rod lock for position holding.
Upgrade checklist
- ✓ Order the MBL32X300-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X300-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM FAQ
Yes, the MAL32X300-CM is discontinued. The exact drop-in replacement is the MBL32X300-CM, which matches the 32mm bore, 300mm stroke, G1/8 port, and CM round-end mounting. The newer MBL uses a riveted body instead of threaded covers.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa it provides 563N push, with a max theoretical force of 82kgf at 1.0MPa. This specific SKU lacks a magnet, so it cannot take a position sensor; the -S version is required for CS1-M/DS1-M switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X300-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-CM → MBL32X300-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X300-CM replacement with price, stock and lead time, usually within 7-8 hours.