This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X300-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X300-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X300-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X300-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA
The AirTAC MAL32X300-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 300mm stroke. It delivers 402N of push force and 346N of pull force at 0.5 MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. The exact drop-in replacement is the MBL32X300-S-CA, which matches the original bore, stroke, output force, port size, and CA pivot mounting.
This legacy unit features a built-in magnet (-S) for CS1-M or DS1-M sensors, though the modern MBL replacement upgrades you to CMSG, DMSG, or EMSG switches. The older MAL body relies on threaded front and back covers, whereas the current MBL utilizes a riveted rolling-packed body for enhanced structural integrity. A fixed rubber bumper absorbs end-of-stroke impacts, while the carbon-steel rod with 20um hard-chrome plating runs through a self-lubricating front-cover bearing guide.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X300-S-CA |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X300-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X300-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA Is Used
Textile Loom Guide Arm
Drives a 300mm travel guide arm on a weaving loom, using the 402N push force at 0.5 MPa to shift yarn carriers while the CA pivot absorbs the lateral arc.
Pallet Transfer Pusher
Extends across a 300mm gap to push small product pallets off a belt line, relying on the fixed rubber bumper to soften the sudden stops at high cycling speeds.
Vertical Carton Flap Folder
Folds corrugated carton flaps on a packaging line, where the two-way grease-retaining seal ensures consistent operation despite the vertical orientation and gravity loads.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA with MBL32X300-S-CA
To replace the MAL32X300-S-CA, order the MBL32X300-S-CA. Verify your PT port threads, the CA pivot back cover for arcing loads, and prepare to upgrade your CS1-M/DS1-M sensors to the CMSG/DMSG/EMSG family. If you need to step down, the 25mm bore offers 245N push at 0.5 MPa; if you need more force, the 40mm bore provides 628N push. Note that a plain cylinder drifts when air is lost, so use an external rod lock for position holding. If end-cushioning is inadequate, the current-line MBLC offers an adjustable air cushion.
Because this is a 300mm stroke, the 12mm rod is highly susceptible to bending under side loads. You must use the CA clevis to allow the body to pivot, or install an external guide rail to prevent seal damage and premature wear.
Upgrade checklist
- ✓ Order the MBL32X300-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X300-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA FAQ
Yes, the MAL32X300-S-CA is discontinued. The exact drop-in replacement is the MBL32X300-S-CA, offering the same 32mm bore, 300mm stroke, 82 kgf max force, G1/8 port, and CA pivot mounting. You will need to upgrade your sensors from the older CS1-M/DS1-M to the current CMSG/DMSG/EMSG family.
At 0.5 MPa, the push force is 402N and the pull force is 346N. At 0.7 MPa, the push force is 563N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X300-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CA → MBL32X300-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X300-S-CA replacement with price, stock and lead time, usually within 7-8 hours.