This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X300-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X300-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X300-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X300-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM
The AirTAC MAL32X300-S-CM is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, utilizing a Ø12 mm carbon-steel rod with a 20 μm hard-chrome plating. Because this legacy unit is end-of-life, AirTAC mandates the MBL32X300-S-CM as the exact drop-in replacement, matching the 32 mm bore, 300 mm stroke, G1/8 port, and CM round-end back cover perfectly.
This specific SKU includes a built-in magnet (-S) for position detection and a CM round-end back cover. The original MAL body relies on threaded front and back covers, whereas the modern MBL upgrade features a riveted rolling-packed body for equal structural integrity. Furthermore, the MAL -S magnet interfaces with the older CS1-M / DS1-M switches, but its MBL successor requires the current CMSG / DMSG / EMSG sensor family. The cylinder relies on a fixed rubber bumper, meaning it is not an adjustable air cushion; if end-of-stroke deceleration is critical, you must step up to the current MBLC variant.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X300-S-CM |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X300-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X300-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM Is Used
Packaging Conveyor Diverters
Drives a 300 mm diverting arm on a packaging line, where the 402 N push force at 0.5 MPa easily shuffles cartons between adjacent belts without overshoot.
Lab Sample Shuttle
Moves sample trays 300 mm into a diagnostic analyzer, utilizing the CM round-end cover to accommodate slight angular misalignments during the extended transfer.
Textile Yarn Guide
Positions a yarn guide carriage across a 300 mm knitting width, taking advantage of the self-lubricating bearing to maintain smooth 30-800 mm/s operation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM with MBL32X300-S-CM
To replace the MAL32X300-S-CM, order the MBL32X300-S-CM, ensuring you retain the exact 300 mm stroke, PT thread form, and CM round-end cover. Because this SKU carries the -S magnet, you must also swap out legacy CS1-M or DS1-M reed switches for the modern CMSG, DMSG, or EMSG series to maintain rod-position sensing. The 32 mm bore provides 402 N push at 0.5 MPa; if your application requires less force, step down to the 25 mm bore (245 N push), or step up to the 40 mm bore (628 N push) for heavier loads. Since the 300 mm stroke is quite long for a Ø12 mm rod, side-load tolerance is low; you must use an external guide or pivot to prevent rod bending. Note that the fixed rubber bumper softens impact but does not hold the load—if air pressure drops, the rod drifts, so deploy an external pilot-operated check valve for position holding.
Upgrade checklist
- ✓ Order the MBL32X300-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X300-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM FAQ
Yes, the MAL32X300-S-CM is discontinued. The exact drop-in replacement is the MBL32X300-S-CM, which matches the 32 mm bore, 300 mm stroke, G1/8 port, and CM mounting. You simply order the MBL32X300-S-CM, though you must upgrade your sensors from the old CS1-M/DS1-M to the new CMSG/DMSG/EMSG family.
The 32 mm bore generates a push force of 402 N and a pull force of 346 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. It operates at 0.1-1.0 MPa with a speed range of 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X300-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-CM → MBL32X300-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X300-S-CM replacement with price, stock and lead time, usually within 7-8 hours.