This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X300-S-U-FA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X300-S-U-FA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X300-S-U-FA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X300-S-U-FA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA
The AirTAC MAL32X300-S-U-FA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 300mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa. AirTAC replaced this legacy unit with the MBL32X300-S-U-FA, a drop-in alternative retaining the exact same bore, stroke, output force, G1/8 port, and FA flange mounting. This 32mm bore uses a 12mm carbon-steel rod with 20um hard-chrome plating, guided by a self-lubricating bearing in the front cover.
This SKU includes a U flat-end back cover for rigid rear mounting and an -S magnet for position detection. Because it has a 300mm stroke, the 12mm rod has limited side-load tolerance and requires an external guide to prevent bending. The original MAL body uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Additionally, the -S magnet on this MAL works with older CS1-M or DS1-M switches, while the MBL successor requires CMSG, DMSG, or EMSG sensors.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X300-S-U-FA |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X300-S-U-FA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X300-S-U-FA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA Is Used
Pallet Routing Diverter
Pushes 300mm to divert medium-weight pallets on a packaging line, utilizing 402N of push force at 0.5MPa to overcome guide friction.
PCB Test Fixture Tray
Extends a 300mm stroke to move an electronics testing tray into a rigid U flat-end rear mounted inspection station, relying on the -S magnet for position feedback.
Carton Flap Folder
Actuates a 300mm stroke to fold heavy cardboard flaps on a case erector, where the FA flange provides stable perpendicular mounting.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA with MBL32X300-S-U-FA
To replace the discontinued MAL32X300-S-U-FA, order the exact MBL32X300-S-U-FA drop-in equivalent. Confirm your 32mm bore, 300mm stroke, G1/8 port, and FA flange mounting. The U flat-end back cover provides a rigid rear interface, while the FA front flange supports straightforward perpendicular mounting. If your application needs a different force class, the next size down is the 25mm bore (245N push at 0.5MPa), and the next size up is the 40mm bore (628N push at 0.5MPa, which also upgrades the port to G1/4). Keep in mind the fixed rubber bumper softens end-of-stroke impacts but is not an adjustable cushion; for deceleration control, step up to the current MBLC line. Because this is a 300mm stroke, use an external guide or pivot to manage side loads. A plain cylinder does not hold position if air pressure drops, so add a rod lock or pilot-operated check valve if drift is unacceptable. Finally, the -S magnet on this MAL pairs with CS1-M and DS1-M switches, but the MBL replacement uses CMSG, DMSG, or EMSG sensors.
Upgrade checklist
- ✓ Order the MBL32X300-S-U-FA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X300-S-U-FA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA FAQ
Yes, the MAL32X300-S-U-FA is discontinued. The exact drop-in replacement is the MBL32X300-S-U-FA, which matches the 32mm bore, 300mm stroke, G1/8 port, FA flange, and U back cover. The MBL uses a riveted rolling-packed body instead of threaded covers, and its -S magnet requires CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M sensors.
At 0.5MPa, the 32mm bore provides 402N of push force and 346N of pull force. At 0.7MPa, the push force increases to 563N. The maximum theoretical force is 82kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X300-S-U-FA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X300-S-U-FA → MBL32X300-S-U-FA)
Tell us the quantity and destination — we quote the drop-in MBL32X300-S-U-FA replacement with price, stock and lead time, usually within 7-8 hours.