This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X30CAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X30CAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X30CAH, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X30CAH
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH
The AirTAC MAL32X30CAH is a discontinued double-acting mini round cylinder featuring a 32mm bore and 30mm stroke. It delivers 402N push and 346N pull force at 0.5 MPa, utilizing a G1/8 port and a CA pivot clevis back cover. AirTAC replaced this legacy unit with the MBL32X30CAH, a drop-in alternative retaining the exact same bore, stroke, output force, port size, and mounting interface.
This SKU lacks a built-in magnet, meaning it cannot support position sensors. Additionally, the original MAL body used threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. The MAL relies on a fixed rubber bumper for end-of-stroke damping rather than an adjustable cushion; if your application requires adjustable air cushioning, you must step up to the MBLC variant on the current line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X30CAH |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X30CAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X30CAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×30 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH Is Used
Packaging Flap Folding
Drives a 30mm stroke folding mechanism on carton erecting machines, where the 402N push force reliably creases heavy cardboard and the CA clevis accommodates pivot arc.
Diverter Gate Actuation
Pushes a routing flap on a conveyor sorting line, utilizing the compact 32mm body and CA pivot to swing the gate clear for changing product lanes.
PCB Test Head Indexing
Positions a testing probe head over circuit boards, taking advantage of the 30mm stroke and self-lubricating bearing guide for high-speed repetitive cycling.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH with MBL32X30CAH
To replace the MAL32X30CAH, order the MBL32X30CAH, ensuring you match the 32mm bore, 30mm stroke, G1/8 port, PT thread form, and CA pivot back cover. If you need to step down, the 25mm bore neighbor provides 245N push at 0.5 MPa; stepping up to the 40mm bore yields 628N push but changes the port to G1/4. Because this SKU has no -S magnet, you cannot add a sensor; if position detection is needed, order an MBL32X30SCAH and note that MBL switches to the CMSG/DMSG/EMSG family instead of the legacy CS1-M/DS1-M. The fixed rubber bumper is not a position lock; the rod will drift if air pressure is lost, so use an external rod lock for suspended loads.
Upgrade checklist
- ✓ Order the MBL32X30CAH (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X30CAH instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH FAQ
Yes, the MAL32X30CAH is discontinued. The exact drop-in replacement is the MBL32X30CAH, which matches the 32mm bore, 30mm stroke, G1/8 port, and CA pivot mounting. The MBL upgrades the body to a riveted rolling-packed design instead of threaded covers.
At 0.5 MPa, it provides 402N push and 346N pull force; at 0.7 MPa, push is 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X30CAH replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30CAH → MBL32X30CAH)
Tell us the quantity and destination — we quote the drop-in MBL32X30CAH replacement with price, stock and lead time, usually within 7-8 hours.