This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X30SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X30SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X30SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X30SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM
The AirTAC MAL32X30SCM is a discontinued double-acting mini round cylinder featuring a 32mm bore and 30mm stroke. It delivers 402N of push force at 0.5MPa, utilizing a 12mm carbon-steel rod with 20um hard chrome plating guided by a self-lubricating front-cover bearing. Because this legacy series is end-of-life, the direct drop-in replacement is the MBL32X30SCM, matching the exact bore, stroke, G1/8 port, and CM round-end mounting.
This specific SKU includes a built-in magnet (-S) for position sensing; on the MAL it pairs with older CS1-M or DS1-M switches, whereas the MBL successor uses the current CMSG, DMSG, or EMSG sensor families. Another key upgrade in the MBL is the riveted rolling-packed body, which replaces the threaded front and back covers found on this MAL. The cylinder relies on a fixed rubber bumper to soften end-of-stroke impacts, and it will drift if air pressure is lost, so an external rod lock is required for strict load holding.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X30SCM |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X30SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X30SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×30 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM Is Used
Packaging Flap Folder
Provides 402N of push at 0.5MPa to swiftly fold cardboard flaps on high-speed carton sealing lines within tight machinery spaces.
PCB Router Gate
Actuates a diverter gate on a PCB conveyor, using the 30mm stroke and CM round-end pivot to route panels into test fixtures.
Textile Tension Arm
Drives a 30mm rapid adjustment on a fabric tensioning arm in textile machinery, benefiting from the grease-retaining two-way piston seal.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM with MBL32X30SCM
To replace the MAL32X30SCM, order the MBL32X30SCM. Confirm your 32mm bore, 30mm stroke, PT thread, and the CM round-end back cover, which is ideal for accepting arcing side movements via a clevis joint. Because this unit has the -S magnet, you must upgrade your sensors from the legacy CS1-M/DS1-M to the modern CMSG/DMSG/EMSG series. If your application requires an adjustable air cushion instead of the standard fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. Note that the 30mm stroke is quite short, so side-load bending risks are minimal, but always verify that the CM pivot adequately handles any angular rod deflection.
Upgrade checklist
- ✓ Order the MBL32X30SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X30SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM FAQ
Yes, the MAL32X30SCM is discontinued. The exact drop-in replacement is the MBL32X30SCM, which matches the 32mm bore, 30mm stroke, G1/8 port, and CM round-end mounting. You will need to update your sensors from the old CS1-M/DS1-M to the CMSG/DMSG/EMSG family.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X30SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SCM → MBL32X30SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X30SCM replacement with price, stock and lead time, usually within 7-8 hours.